Get matched with top garbage removal pros in Wecota, SD

The main issue with garbage disposals is clogging. This can mean a clogging of the pipes that expel the food along with water, or a clogging of the mechanical parts themselves. The problem lies in the solution because you can’t easily see clogs if they’re inside the system, and reaching in to dislodge stuck items is a risky proposal. Call a pro and ask what they would do, but if you can’t see the clog easily, and running the unit won’t free it, you need to let a professional handle the fix. 

While unplugging your garbage disposal and plugging it back in may help, most units have an actual reset button, a bright red switch found on the underside of your unit. If your garbage disposal needs resetting, you may notice this button sticking out about a quarter of an inch from the surface of the unit, with which it’s usually flush. Simply depress this reset button to reset the unit, and then test to ensure it’s working about 10 minutes later.

Whether it's worth repairing your garbage disposal depends on its age and the specific problem. Generally, if the unit is eight years old or younger, repair is a good option. For minor issues like a bad seal or a simple jam, a repair can be inexpensive, sometimes under $10. However, if the motor is broken (a repair that can cost $150 or more) or the unit is getting old, it's often more cost-effective to replace the entire disposal.

If your garbage disposal powers up and you can hear it hum, but the arms inside aren’t moving, the problem might be a stubborn clog, a build-up of grease, or a jam of the impeller plate. To troubleshoot these, ensure your unit is off and disconnected from its power source before checking inside the drain or attempting to manually rotate the impeller arms or plate from the underside of the unit. A hex wrench can help.