Best aquarium service pros near Wagner, SD

There are three layers of wastewater in a septic tank: scum (solid waste that floats to the top of the wastewater), liquid (the relatively clean liquid wastewater in between the two other layers), and sludge (solid waste that falls to the bottom of the wastewater). The buildup of sludge is one of the main reasons septic tanks need to be pumped. If the tank is more than 1/3 of the way full with a combination of sludge and scum, it’s time to call a pro for pumping.

Regular pump-outs, inspections, avoiding chemicals harming bacteria, and managing water usage are keys to sustaining peak system function.

To break down fat in a septic tank, you will need to hire a professional septic tank cleaner near you to either pump the septic tank or use a shock treatment to clear the clog. It’s important to not pour fat, oil, or grease (memorable with the helpful acronym FOG) down your drains because they can clog the septic system. Instead, you can dispose of them with regular trash, or if your household produces a lot of FOG waste, you may want to install a grease trap for your plumbing.

All municipalities in the U.S. require a permit for septic tank installation or septic system alteration, and the permit will usually cost between $450 and $2,500. Some municipalities also require permits for septic system repair. You’ll either need to contact your local building department or your septic tank company to ask if this is necessary before carrying out the work. Permits are not typically required to have your septic tank pumped, so provided your septic company is licensed, you can move forward with the work as needed.