Get matched with top stone countertop pros in Springfield, SD

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The least porous countertop material is engineered quartz. Made from a blend of natural quartz and resins, it is non-porous and highly resistant to stains, scratches, and bacteria. This makes quartz countertops exceptionally low-maintenance and durable, ideal for kitchens and bathrooms where hygiene and easy upkeep are priorities. Other non-porous options include solid surface materials like Corian, which also offer excellent resistance to moisture and stains.

Yes, a 12-inch countertop overhang will need support to keep it stable. The exact type of support depends on your countertop thickness and material. Thicker, heavier countertops need extra support, like a corbel or a post, to keep them from sagging or toppling over.

Granite is heavier than quartz, since it has a higher density. Quartz is made up of engineered stone, which is why it tends to weigh less than granite. Most granite countertops are ¾-inch thick and weigh about 13 pounds per square foot.