Wiring a light switch wrong can cause a fire if the incorrect wiring causes arcing, meaning the current jumps uncontrolled from one conductor to another. Loose wires or worn wires that are not repaired or replaced can cause arcing. If you’re not 100% sure you can do the job safely, don’t attempt to wire a light switch on your own.

The NFPA model codes and International Residential Code (IRC) mandate that all new one- and two-family homes have fire sprinkler systems. However, all municipalities are different. The best way to determine if your municipality requires fire sprinklers is to contact your state fire marshal’s office. One reason to install a fire sprinkler system is that it’s the first line of defense in putting out a fire and alerting your family of emergencies.

If your hardwired smoke alarm keeps going off, it could be because the backup battery needs replacing. When replacing the battery doesn’t stop your smoke alarm from beeping, try holding the reset button for 15 to 30 seconds or removing dust from the openings in the alarm. If it continues to chirp, it could be faulty and require replacement.

There are several maintenance tips you should take to ensure your pellet stove's safety and proper maintenance. You should vacuum the ash pan every week to prevent overflowing and clean the stove and surrounding vents every three to four months. It’s also important to get a professional inspection every year and install a carbon monoxide detector close to your stove. Be sure to dispose of hot ashes in a closed metal container; store it outside, away from the house. Only use the pellets recommended by your stove's manufacturer, and follow any cleaning and maintenance instructions.