Get matched with top woodworkers in Armour, SD

Q: What is the difference between a woodworker and a carpenter?

• <div><p>While carpenters and woodworkers perform similar tasks, their focus differs. A carpenter is typically responsible for the structural woodwork involved in construction, such as framing, installing sheathing, hanging kitchen cabinets, and installing trusses. In contrast, a woodworker handles more intricate and custom projects, like building custom furniture, installing wainscoting, and creating detailed interior trim and moldings. Based on these definitions, many woodworkers can perform the tasks of a carpenter, but it's always best to discuss your specific project with a professional to ensure they have the necessary skills.</p></div>

Q: What is the difference between a spindle and a baluster?

• <div><p>Many people, including professionals in the field, use baluster and spindle interchangeably to describe the vertical components of a railing (or technically, a balustrade). However, there are subtle or distinct differences, depending on who you ask. The most common interpretation is that spindles are thin or delicate versions of balusters. </p></div>

Q: Is it normal for a contractor to ask for a down payment, and how much should you pay up front?

• <div><p>It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.</p></div>

Q: How much do floor joists cost?

• <div><p>If you&rsquo;re just replacing a few broken or damaged joists, you can expect to pay anywhere from $100 to $300 per joist. However, a complete installation for a home or room will take into account the cost of labor, which ranges from $25 to $40 per hour. Floor joist installation for an entire room, for example, can cost between $5,000 and $10,000, depending on the room's size and the materials used. </p></div>

Q: Is it easier to cut wood when it’s wet or dry?

• <div><p>Whether or not it&rsquo;s easier to cut wood when it&rsquo;s wet versus dry depends largely on the type of tool you use and the wood you&rsquo;re cutting. For example, a chain saw should still be able to cut through wet wood with relative ease, but it may be more difficult to maneuver due to the wood fibers sticking to the chains of the saw. </p><p>However, you might want to avoid cutting wood entirely when it&rsquo;s wet if you&rsquo;re pruning your tree. Sawing a wet tree that you don&rsquo;t plan on removing can also encourage bacterial and fungal growth and decay.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Armour, SD?

Select your specific project to find the pro for you.

Find Woodworkers in Armour

Deckers

5.0(

)

Serving Armour, SD and surrounding areas

Approved

Super Service Award Winner

In business since 2019

Free estimates

Emergency services offered

"Linden did an excellent job with the replacement of our deck. He worked in a timely manner and is very thoughtful and polite. we couldn’t be more happier with the outcome. Many of our neighbors have already stopped by to complement the new deck . We will be spending many hours out there Thank you Linden."

+17

Response time2 days

Serving Armour, SD and surrounding areas

Approved

In business since 2021

Free estimates

Credit card accepted

"Super great carpenter! Did a great job with whatever I asked and he stands behind his bids and his job. He came back and checked things over a year later and made sure everything was still up to par."

+18

7 neighbors recently requested a quote

Serving Armour, SD and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"I was very impressed with Sentri Homes - their customer service was excellent. They sent a subcontractor to install some vinyl laminate in my bathroom and he ended up getting glue all over the carpet in our bedroom. The sub ended up ghosting both me and Sentri, leaving me stuck with a ruined carpet. Sentri stuck with me for over a month to get the carpet replaced with the identical original and to get the vinyl job 100% completed. The carpet was a Home Depot exclusive and Sentri handled everything with them. I will be using Sentri for a much bigger renovation I have coming up soon, because I know that they will make sure everything gets done right no matter what problems come up. The vinyl looks great too."

25 neighbors recently requested a quote

Serving Armour, SD and surrounding areas

Approved

In business since 2020

Free estimates

Customers say: Quick response

"He is very good at his job."

Recommended by100%of homeowners

Request Quote

Wurtz Construction

New to Angi

Serving Armour, SD and surrounding areas

Approved

In business since 2010

Free estimates

Offers commercial services

We are committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade, combined with ability, is what makes us true professionals. Above all, we are watchful of our customers' interests and make their concerns the basis of our business

Response time4 days

3 neighbors recently requested a quote

Serving Armour, SD and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"quality is always excellent. Delivery has always been on time. this is the third time I have used Arkansas wood door"

Recommended by100%of homeowners

Serving Armour, SD and surrounding areas

In business since 2006

Credit card accepted

"I never contacted the provider or used this service in anyway. I have to
write this review so that the request to write this review stops
popping up.
The rating is bogus as it is required to be able to submit.
"

California Client Saves with HMD Designer Discounts

Recommended by54%of homeowners

Request Quote

James Hand Construction

5.0(

)

Serving Armour, SD and surrounding areas

In business since 1979

Free estimates

"Was one of the most professional men, and pleases me with their work in a timely manner."

Recommended by100%of homeowners

Request Quote

Ward Harlan Construction

3.0(

)

Serving Armour, SD and surrounding areas

In business since 2013

Free estimates

Emergency services offered

"Ward was very friendly and professional. He did a great job and very reasonable. I would recommend him highly!"

Recommended by100%of homeowners

Request Quote

Spanier Woodworking, Inc.

New to Angi

Serving Armour, SD and surrounding areas

In business since 1990

Free estimates

With over 29 years of experience in the Cabinets & Countertops industry, we are the experts you need to take care of your home or business. We take pride in our quality of work, will treat your home as we would treat our own. Give Spanier Woodworking, Inc., a call today, we look forward to working with you!

Request Quote

Showing 1-10 of 19

Woodworking questions, answered by experts

While carpenters and woodworkers perform similar tasks, their focus differs. A carpenter is typically responsible for the structural woodwork involved in construction, such as framing, installing sheathing, hanging kitchen cabinets, and installing trusses. In contrast, a woodworker handles more intricate and custom projects, like building custom furniture, installing wainscoting, and creating detailed interior trim and moldings. Based on these definitions, many woodworkers can perform the tasks of a carpenter, but it's always best to discuss your specific project with a professional to ensure they have the necessary skills.

Many people, including professionals in the field, use baluster and spindle interchangeably to describe the vertical components of a railing (or technically, a balustrade). However, there are subtle or distinct differences, depending on who you ask. The most common interpretation is that spindles are thin or delicate versions of balusters.

It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.

If you’re just replacing a few broken or damaged joists, you can expect to pay anywhere from $100 to $300 per joist. However, a complete installation for a home or room will take into account the cost of labor, which ranges from $25 to $40 per hour. Floor joist installation for an entire room, for example, can cost between $5,000 and $10,000, depending on the room's size and the materials used.

Whether or not it’s easier to cut wood when it’s wet versus dry depends largely on the type of tool you use and the wood you’re cutting. For example, a chain saw should still be able to cut through wet wood with relative ease, but it may be more difficult to maneuver due to the wood fibers sticking to the chains of the saw.

However, you might want to avoid cutting wood entirely when it’s wet if you’re pruning your tree. Sawing a wet tree that you don’t plan on removing can also encourage bacterial and fungal growth and decay.

The Armour, SD homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
Audrey Bruno
•
Aug 1, 2026Aug 1, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Wood Stair Installation Contractor
Looking to hire a pro for wood stair installation? Learn how to find qualified contractors, questions to ask, and what to expect for your project.
Kristin Salaky
•
Aug 4, 2026Aug 4, 2026
How to Choose the Right Sandpaper Grit for Your Project
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.
Kaitlyn Pacheco
•
Aug 4, 2026Aug 4, 2026
How to Waterproof Wood With 3 Simple Methods
Three effective ways to waterproof your wood and protect it from damage: hand-rubbed oil, sealant coating, and staining. Read on to learn how, step by step.