Get matched with top paving pros in Olanta, SC

Maintaining a driveway depends on the material your driveway is made of. Concrete and asphalt should be sealed to protect against water and freeze-thaw cycles. Cracks and expansion joints should be filled with a flexible polyurethane caulk or asphalt sealer. Before you apply a sealant to your driveway, consider pressure washing the surface. It will take off any loose sealant and any grime that might have caused a stain. Sealing over dirt and stains will trap it under the sealer.

If you live in colder climates, consider using sand rather than salt to de-ice. Sand helps melt the snow and ice without speeding up the freezing and unthawing process of your driveway, which helps prevent cracks from forming from the constant fluctuation of temperatures.

Asphalt provides durability, cost-effectiveness, and a smooth surface ideal for high-traffic areas.

The answer to whether or not you need to get a permit before you start your driveway can vary widely based on local ordinances and the scope of your driveway ideas. In most urban and suburban areas, a permit is needed before building a new driveway to ensure that a homeowner is using safe materials and proper drainage practices while designing and constructing a new driveway. In some rural areas, a homeowner may not be required to apply for a permit. When building a new driveway on your own, always check with your local building department to see if you need to request a permit. When hiring a driveway contractor, verify that the right permits are being used before driveway construction begins.

Yes, permeable paving is expensive. For driveways, expect to pay up to $70 per square foot; for patios, permeable paving can cost up to $30 per square foot. Costs will depend on the type of material you choose, plus the standard labor rate in your area.