Top-rated structural engineers.

Get matched with top structural engineers in Yatesville, PA

Enter your ZIP and get matched with up to 5 pros

Need a pro for your structural engineering project in Yatesville, PA?

Select your specific project to find the pro for you.

Find Structural engineers in Yatesville

Avatar for Groundworks

Groundworks

3819 N Susquehanna Trl
4.39(
57
)
Approved Pro

Groundworks

3819 N Susquehanna Trl
4.39(
57
)
Approved Pro
Customers say: Super punctual
32 local quotes requested
50 years of experience

Groundworks, formerly Baker's Waterproofing, has specialized in helping homeowners with their foundation repair, waterproofing, and concrete needs since 2009. Our top priority is providing high-quality home repair solutions and personalized service across central Pennsylvania. With fully trained technicians, industry-leading products, and nationally backed warranties, Groundworks is here to restore your basement, foundation, or concrete. PA158514 (PA)

"The job went extremely well. Aaron Lenker and Corbin Gillichbauer performed the service and were professional and polite. I’m completely satisfied. Well done."

Paul S on July 2025

Groundworks, formerly Baker's Waterproofing, has specialized in helping homeowners with their foundation repair, waterproofing, and concrete needs since 2009. Our top priority is providing high-quality home repair solutions and personalized service across central Pennsylvania. With fully trained technicians, industry-leading products, and nationally backed warranties, Groundworks is here to restore your basement, foundation, or concrete. PA158514 (PA)

"The job went extremely well. Aaron Lenker and Corbin Gillichbauer performed the service and were professional and polite. I’m completely satisfied. Well done."

Paul S on July 2025


Avatar for NEC Solutions, LLC

NEC Solutions, LLC

504 Juneberry Court
5.00(
10
)
Approved Pro

NEC Solutions, LLC

504 Juneberry Court
5.00(
10
)
Approved Pro
Customers say: Quick response
13 local quotes requested
10 years of experience

NEC Solutions LLC is a licensed Pennsylvania Civil & Structural Engineering firm with over 5 years of experience. (Direct :610-888-9818) We offer complete services for residential and commercial projects, from design to permitting and construction. Civil Services: Soil testing for septic systems, site surveys, contour mapping, stormwater design, and construction layout. Structural Services: New construction design, additions, structural drawings for permits and construction, foundation design/calculations, foundation and deck inspections, evaluations for renovations, solar panel permits with load calculations. Drafting Services: CAD drafting, 3D modeling, quantity takeoffs, permit packages. Permit Services: City of Philadelphia L&I permits, PennDOT HOP permits, full township coordination. We ensure accuracy, code compliance, and professional service on every project. Website: www.necsolutions.us Email: [email protected] Mobile: 610-888-9818

"NEC did good work, turn around time was fast, good experience all around. "

Steve C on June 2025

NEC Solutions LLC is a licensed Pennsylvania Civil & Structural Engineering firm with over 5 years of experience. (Direct :610-888-9818) We offer complete services for residential and commercial projects, from design to permitting and construction. Civil Services: Soil testing for septic systems, site surveys, contour mapping, stormwater design, and construction layout. Structural Services: New construction design, additions, structural drawings for permits and construction, foundation design/calculations, foundation and deck inspections, evaluations for renovations, solar panel permits with load calculations. Drafting Services: CAD drafting, 3D modeling, quantity takeoffs, permit packages. Permit Services: City of Philadelphia L&I permits, PennDOT HOP permits, full township coordination. We ensure accuracy, code compliance, and professional service on every project. Website: www.necsolutions.us Email: [email protected] Mobile: 610-888-9818

"NEC did good work, turn around time was fast, good experience all around. "

Steve C on June 2025


F & D Development Company, Inc.

PO Box 20404
4.71(
55
)
Approved Pro

F & D Development Company, Inc.

PO Box 20404
4.71(
55
)
Approved Pro
Customers say: Quick response
Recommended by 96% of Angi customers
Recommended by 96% of HomeAdvisor customers
10 local quotes requested

Turning Dreams into Reality. Your home may well be the most complex, interesting, and expensive project you'll ever undertake. Architectural designers are educated to help you define your needs, present options you may never have considered, and help you get the most for your valuable investment. There is a certain magic that can be seen and felt in homes created through the close working relationship between owner and designer. At F & D Development Company, Inc., we've been specializing in residential architecture since 1990. We listen carefully to our clients and strive to integrate your needs and dreams with your budget. We work with each of our clients to create a total home environment, both interior and exterior that is visually interesting and exciting as well as functional. We provide a range of residential architectural services to clients from complete architectural services for a new home to assistance with additions and remodeling.

"Prompt service, timely arrival. I expected a more extensive report but nonetheless it was short and to the point."

Janet G on March 2023

Turning Dreams into Reality. Your home may well be the most complex, interesting, and expensive project you'll ever undertake. Architectural designers are educated to help you define your needs, present options you may never have considered, and help you get the most for your valuable investment. There is a certain magic that can be seen and felt in homes created through the close working relationship between owner and designer. At F & D Development Company, Inc., we've been specializing in residential architecture since 1990. We listen carefully to our clients and strive to integrate your needs and dreams with your budget. We work with each of our clients to create a total home environment, both interior and exterior that is visually interesting and exciting as well as functional. We provide a range of residential architectural services to clients from complete architectural services for a new home to assistance with additions and remodeling.

"Prompt service, timely arrival. I expected a more extensive report but nonetheless it was short and to the point."

Janet G on March 2023


Avatar for GTS Consultants

GTS Consultants

211 Warren Street
No reviews yet

GTS Consultants

211 Warren Street
No reviews yet
28 years of experience

GTS Consultants has earned a reputation as a Minority Owned and Operated business since 1997. GTS Consultants are known for: -being highly regarded-with warm referrals -client responsiveness -professional surveyors -providing excellent communication -quick turnaround -competitive prices We have gained the respect and confidence of our clients by providing technical excellence and quality services throughout New York, New Jersey and Pennsylvania. Our corporate headquarters is located in the beautiful city of Newark, New Jersey. We look forward to hearing from and working with you soon.

GTS Consultants has earned a reputation as a Minority Owned and Operated business since 1997. GTS Consultants are known for: -being highly regarded-with warm referrals -client responsiveness -professional surveyors -providing excellent communication -quick turnaround -competitive prices We have gained the respect and confidence of our clients by providing technical excellence and quality services throughout New York, New Jersey and Pennsylvania. Our corporate headquarters is located in the beautiful city of Newark, New Jersey. We look forward to hearing from and working with you soon.



Avatar for Stoppi Engineering

Stoppi Engineering

107 Fox Hill Dr
5.00(
6
)

Stoppi Engineering

107 Fox Hill Dr
5.00(
6
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

I am a professional engineer who has expertise in residential structural engineering, home inspection, architectural engineering, and building codes. I get involved in projects where professional structural engineering considerations are involved or that were unveiled during home inspections. I can also perform home inspections as a professional engineer. I am an expert in all building codes and can convey pathways to building code compliance to contractors and homeowners. I perform design work as an architectural engineer (similar to an architect). If a project involves only plans and not a site presence, I can perform work for the entire state and surrounding states. I am a licensed engineer in 34 states.

"I am currently in the process of removing a load bearing wall for my home. I reached out to John P Stoppi for assistance with a support load calculation and sizing of a clear span beam. John was very helpful throughout the whole process."

Christopher G on December 2018

I am a professional engineer who has expertise in residential structural engineering, home inspection, architectural engineering, and building codes. I get involved in projects where professional structural engineering considerations are involved or that were unveiled during home inspections. I can also perform home inspections as a professional engineer. I am an expert in all building codes and can convey pathways to building code compliance to contractors and homeowners. I perform design work as an architectural engineer (similar to an architect). If a project involves only plans and not a site presence, I can perform work for the entire state and surrounding states. I am a licensed engineer in 34 states.

"I am currently in the process of removing a load bearing wall for my home. I reached out to John P Stoppi for assistance with a support load calculation and sizing of a clear span beam. John was very helpful throughout the whole process."

Christopher G on December 2018



Effective Technical Applications, Inc.

10 Wayne Avenue
No reviews yet

Effective Technical Applications, Inc.

10 Wayne Avenue
No reviews yet
27 years of experience

“ANGIE’S LIST DISCOUNT” – My Angie’s List Clients are given a ten percent (10%) discount on my Fee since Angie’s List does not charge businesses to list their services; therefore, my marketing cost is zero ($0.00) for my Angie’s List Clients. “FINANCING” – Clients are requested to make payment by check with sufficient funds on deposit to cover the check. Should the client be unable to make timely payment then their project is placed on hold until payment is received. The only penalty my Client incurs is loss of schedule, which they control with timely payment. No late fee ($0.00), no interest ($0.00), and no returned check fee ($0.00), is charged. “DESIGN/BUILD SERVICES FINANCING” – The cost of my services (Planning, Design, Engineering, Plans Drafting – CAD, Construction Management, & Inspection) is built into the “Construction Cost”; therefore, my services can be financed over the life of my Client’s mortgage. “EMPLOYEES” – Jonathan A. Snyder is a self-employed Professional Engineer, company of 1 person, who is networked with other qualified designers, engineers, and construction professionals. “PLANS PAYMENT” – Construction Plans are provided on either a “Fixed Fee” or “Not to Exceed Time & Expense” basis, payable in three (3) installments; 1/3 due at “Contract Signing”, 1/3 due at “Planning / Design Review”, 1/3 (or balance) due at “Delivery of Completed Plans”. “DESIGN/BUILD” – “SUB-CONTRACTING” and “PAYMENT”: LABOR – Construction Labor is bid by a minimum of three (3) Sub-contractors; all Bids are reviewed and presented to the Building Owner with recommendation on the “Lowest Qualifying Bid”; the Bid is awarded (Sub-contracted) to the contractor preferred by the Building Owner. MATERIALS – Quotes for all Construction Materials are obtained from a minimum of three (3) suppliers; all Quotes are reviewed and presented to the Building Owner with recommendation on best “Supplier”; Material Purchase Orders are awarded to the supplier preferred by the Building Owner. ENGINEER’S FEE – Engineer’s Fee includes the cost of Planning, Design, Engineering, Plans Drafting (CAD), Construction Management, & Inspection and is provided on a fixed percentage basis of the “Actual Labor & Materials Cost” (“AL&MC”); 1/3 due at contract signing based on the “Estimated Labor & Materials Cost” (“EL&MC”) for the project; the remaining balance is paid at each “Construction Draw” and based on the “AL&MC”. The Engineer’s Fee limit is set at time of contract signing based on the “EL&MC”. The Engineer’s Fee is reduced if the “AL&MC” is less than “EL&MC”; the Engineer’s Fee is not increased if the “AL&MC” is greater than “EL&MC” used at Contract Signing. “CHANGE ORDERS”: MUNICIPAL AUTHORITY OPINION: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are not based on a “Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or an International Code Council Code (ICC I-Codes) References and are based on the “Reviewing Authority’s Opinion / Preferred Method” are provided on an “Engineering Change Order Basis”. MUNICIPAL AUTHORITY CITED ORDINANCE or STATUTE REFERENCE: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are based on a “Cited Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or International Code Council Codes (ICC I-Codes) References are provided at no charge to my Client. NO SCOPE CHANGE – All “Plan Changes” within the Contract Scope of Work (i.e. Change a room layout) requested prior to “Final Plans Issue” are provide at no additional charge ($0.00). SCOPE CHANGE – All “Plan Changes” not within the Contract S

“ANGIE’S LIST DISCOUNT” – My Angie’s List Clients are given a ten percent (10%) discount on my Fee since Angie’s List does not charge businesses to list their services; therefore, my marketing cost is zero ($0.00) for my Angie’s List Clients. “FINANCING” – Clients are requested to make payment by check with sufficient funds on deposit to cover the check. Should the client be unable to make timely payment then their project is placed on hold until payment is received. The only penalty my Client incurs is loss of schedule, which they control with timely payment. No late fee ($0.00), no interest ($0.00), and no returned check fee ($0.00), is charged. “DESIGN/BUILD SERVICES FINANCING” – The cost of my services (Planning, Design, Engineering, Plans Drafting – CAD, Construction Management, & Inspection) is built into the “Construction Cost”; therefore, my services can be financed over the life of my Client’s mortgage. “EMPLOYEES” – Jonathan A. Snyder is a self-employed Professional Engineer, company of 1 person, who is networked with other qualified designers, engineers, and construction professionals. “PLANS PAYMENT” – Construction Plans are provided on either a “Fixed Fee” or “Not to Exceed Time & Expense” basis, payable in three (3) installments; 1/3 due at “Contract Signing”, 1/3 due at “Planning / Design Review”, 1/3 (or balance) due at “Delivery of Completed Plans”. “DESIGN/BUILD” – “SUB-CONTRACTING” and “PAYMENT”: LABOR – Construction Labor is bid by a minimum of three (3) Sub-contractors; all Bids are reviewed and presented to the Building Owner with recommendation on the “Lowest Qualifying Bid”; the Bid is awarded (Sub-contracted) to the contractor preferred by the Building Owner. MATERIALS – Quotes for all Construction Materials are obtained from a minimum of three (3) suppliers; all Quotes are reviewed and presented to the Building Owner with recommendation on best “Supplier”; Material Purchase Orders are awarded to the supplier preferred by the Building Owner. ENGINEER’S FEE – Engineer’s Fee includes the cost of Planning, Design, Engineering, Plans Drafting (CAD), Construction Management, & Inspection and is provided on a fixed percentage basis of the “Actual Labor & Materials Cost” (“AL&MC”); 1/3 due at contract signing based on the “Estimated Labor & Materials Cost” (“EL&MC”) for the project; the remaining balance is paid at each “Construction Draw” and based on the “AL&MC”. The Engineer’s Fee limit is set at time of contract signing based on the “EL&MC”. The Engineer’s Fee is reduced if the “AL&MC” is less than “EL&MC”; the Engineer’s Fee is not increased if the “AL&MC” is greater than “EL&MC” used at Contract Signing. “CHANGE ORDERS”: MUNICIPAL AUTHORITY OPINION: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are not based on a “Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or an International Code Council Code (ICC I-Codes) References and are based on the “Reviewing Authority’s Opinion / Preferred Method” are provided on an “Engineering Change Order Basis”. MUNICIPAL AUTHORITY CITED ORDINANCE or STATUTE REFERENCE: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are based on a “Cited Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or International Code Council Codes (ICC I-Codes) References are provided at no charge to my Client. NO SCOPE CHANGE – All “Plan Changes” within the Contract Scope of Work (i.e. Change a room layout) requested prior to “Final Plans Issue” are provide at no additional charge ($0.00). SCOPE CHANGE – All “Plan Changes” not within the Contract S


"We asked our realtor for a “pit bull” inspector and she recommended this company. We were present with the inspector and asked a lot of questions and listened intently to his concerns and observations. We left feeling like we had some issues but nothing major. Well, after settlement it became clear that the inspector missed a huge carpenter ant infestation that damaged the entire back of the house including walls and beams. He missed leaking windows and pipes that had cause mold and mildew damage in two separate areas of the house. He missed several areas of roof damage and a decaying rotting exterior chime to structure. When I pointed to the ceiling and said is that brown spot a leak he said no, that’s just a missed paint spot! We made settlement after what we thought was a good inspection report. It turns out that we had to spend tens of thousands of dollars on critical repairs that the inspector missed or assured us were minor. The roof and window leaks were severe. The carpenter ant infestation was critical. Needless to say we were very angry and extremely disappointed that these things got missed and we got misled. We would not recommend this inspector to others."

Trish S on October 2020

Property Inspections for Home and or Buildings, Private Commercial or otherwise

"We asked our realtor for a “pit bull” inspector and she recommended this company. We were present with the inspector and asked a lot of questions and listened intently to his concerns and observations. We left feeling like we had some issues but nothing major. Well, after settlement it became clear that the inspector missed a huge carpenter ant infestation that damaged the entire back of the house including walls and beams. He missed leaking windows and pipes that had cause mold and mildew damage in two separate areas of the house. He missed several areas of roof damage and a decaying rotting exterior chime to structure. When I pointed to the ceiling and said is that brown spot a leak he said no, that’s just a missed paint spot! We made settlement after what we thought was a good inspection report. It turns out that we had to spend tens of thousands of dollars on critical repairs that the inspector missed or assured us were minor. The roof and window leaks were severe. The carpenter ant infestation was critical. Needless to say we were very angry and extremely disappointed that these things got missed and we got misled. We would not recommend this inspector to others."

Trish S on October 2020


E D PONS & ASSOC INC

70 S FRANKLIN ST
No reviews yet

E D PONS & ASSOC INC

70 S FRANKLIN ST
No reviews yet
47 years of experience

we are consulting structural engineering firm providing designs and documentations of foundations, building structure-beams,columns, floor and roof framing- building evaluations, structural reports. we have five structural engineers of which three (3) are registered professional engineers (PE). before any task, we send client proposal for the project.

we are consulting structural engineering firm providing designs and documentations of foundations, building structure-beams,columns, floor and roof framing- building evaluations, structural reports. we have five structural engineers of which three (3) are registered professional engineers (PE). before any task, we send client proposal for the project.

Showing 1-10 of 16
Structural Engineering questions, answered by experts

Yes, you can build over a stump if the roots are no longer alive. Living roots will continue to grow and may damage your new construction over time. Similarly, you should also remove rotting stumps because they may continue to attract pests and even cause new structures (especially those made from wood) to decompose as well.

A split-level home is one that has several staggered floors connected by short staircases, while a split floor plan separates the primary bedroom from the rest of the bedrooms. Split floor plans are most often found in single-story homes, while split-level homes are always at least two stories.

Dormers must be able to bear the load of their own construction and the added window. The style of the dormer, however, will determine where the weight loads onto your home's structure. A gable dormer bears the weight on the side walls whereas a shed dormer bears it on the front walls.

A structural inspection report will include a detailed description of the structural engineer’s findings, applicable photographs, and recommendations to correct the issue. The contents of the report may depend on the scope of the inspection but might also include a time and cost estimate for recommended work to correct any structural problems found during the inspection. 

The depth of any foundation style depends on your climate and how deep the frost line is, as building code requires that the footers of a foundation—which are built into a monolithic slab—sit at least a foot below the frost line. At the southern tip of Florida, for example, a monolithic slab foundation would only need to sit 12 inches under the soil at the widest parts. On some parts of the Canadian border, the frost line is 100 inches, which would mean a minimum of 112 inches, which is prohibitively deep for a monolithic slab.

The Yatesville, PA homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.