Get matched with top driveway gate pros in Springfield, PA

It does matter which way a hinge is installed because it’s possible to install a hinge backward. The hinge pin should face the direction in which the door will swing, making the pin visible. Exterior doors that swing outward need a security hinge with an Allen set screw in the center to prevent someone from removing the hinge from the outside and accessing the home or business.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

For homeowners concerned about security, an electric gate may offer peace of mind. Electric gates will require a code or remote to open, so you don’t have to worry about young children getting out of the yard or someone breaking onto your property by simply swinging open the gate. But because it needs power to operate, installing an electric gate will be more complex and expensive.

Generally, the standard 10- to 12-inch-long and 1- to 1.5-inch-diameter gate springs will work. However, if you have an especially wide, thick, or heavy garden gate, you may need to opt for a longer, broader—and pricier—model to ensure secure closure and good longevity. These typically range between 12 and 16 inches long and are over 1.5 inches in diameter.