
Get matched with top structural engineers in Pottsville, PA
There are 0 highly-rated local structural engineers.
Need a pro for your structural engineering project in Pottsville, PA?
Find Structural engineers in Pottsville

Groundworks
Groundworks
Groundworks, formerly Baker's Waterproofing, has specialized in helping homeowners with their foundation repair, waterproofing, and concrete needs since 2009. Our top priority is providing high-quality home repair solutions and personalized service across central Pennsylvania. With fully trained technicians, industry-leading products, and nationally backed warranties, Groundworks is here to restore your basement, foundation, or concrete. PA158514 (PA)
"The job went extremely well. Aaron Lenker and Corbin Gillichbauer performed the service and were professional and polite. I’m completely satisfied. Well done."
Paul S on July 2025
Groundworks, formerly Baker's Waterproofing, has specialized in helping homeowners with their foundation repair, waterproofing, and concrete needs since 2009. Our top priority is providing high-quality home repair solutions and personalized service across central Pennsylvania. With fully trained technicians, industry-leading products, and nationally backed warranties, Groundworks is here to restore your basement, foundation, or concrete. PA158514 (PA)
"The job went extremely well. Aaron Lenker and Corbin Gillichbauer performed the service and were professional and polite. I’m completely satisfied. Well done."
Paul S on July 2025

Stoppi Engineering
Stoppi Engineering
I am a professional engineer who has expertise in residential structural engineering, home inspection, architectural engineering, and building codes. I get involved in projects where professional structural engineering considerations are involved or that were unveiled during home inspections. I can also perform home inspections as a professional engineer. I am an expert in all building codes and can convey pathways to building code compliance to contractors and homeowners. I perform design work as an architectural engineer (similar to an architect). If a project involves only plans and not a site presence, I can perform work for the entire state and surrounding states. I am a licensed engineer in 34 states.
"I am currently in the process of removing a load bearing wall for my home. I reached out to John P Stoppi for assistance with a support load calculation and sizing of a clear span beam. John was very helpful throughout the whole process."
Christopher G on December 2018
I am a professional engineer who has expertise in residential structural engineering, home inspection, architectural engineering, and building codes. I get involved in projects where professional structural engineering considerations are involved or that were unveiled during home inspections. I can also perform home inspections as a professional engineer. I am an expert in all building codes and can convey pathways to building code compliance to contractors and homeowners. I perform design work as an architectural engineer (similar to an architect). If a project involves only plans and not a site presence, I can perform work for the entire state and surrounding states. I am a licensed engineer in 34 states.
"I am currently in the process of removing a load bearing wall for my home. I reached out to John P Stoppi for assistance with a support load calculation and sizing of a clear span beam. John was very helpful throughout the whole process."
Christopher G on December 2018

NEC Solutions, LLC
NEC Solutions, LLC
NEC Solutions LLC is a licensed Pennsylvania Civil & Structural Engineering firm with over 5 years of experience. (Direct :610-888-9818) We offer complete services for residential and commercial projects, from design to permitting and construction. Civil Services: Soil testing for septic systems, site surveys, contour mapping, stormwater design, and construction layout. Structural Services: New construction design, additions, structural drawings for permits and construction, foundation design/calculations, foundation and deck inspections, evaluations for renovations, solar panel permits with load calculations. Drafting Services: CAD drafting, 3D modeling, quantity takeoffs, permit packages. Permit Services: City of Philadelphia L&I permits, PennDOT HOP permits, full township coordination. We ensure accuracy, code compliance, and professional service on every project. Website: www.necsolutions.us Email: [email protected] Mobile: 610-888-9818
"NEC did good work, turn around time was fast, good experience all around. "
Steve C on June 2025
NEC Solutions LLC is a licensed Pennsylvania Civil & Structural Engineering firm with over 5 years of experience. (Direct :610-888-9818) We offer complete services for residential and commercial projects, from design to permitting and construction. Civil Services: Soil testing for septic systems, site surveys, contour mapping, stormwater design, and construction layout. Structural Services: New construction design, additions, structural drawings for permits and construction, foundation design/calculations, foundation and deck inspections, evaluations for renovations, solar panel permits with load calculations. Drafting Services: CAD drafting, 3D modeling, quantity takeoffs, permit packages. Permit Services: City of Philadelphia L&I permits, PennDOT HOP permits, full township coordination. We ensure accuracy, code compliance, and professional service on every project. Website: www.necsolutions.us Email: [email protected] Mobile: 610-888-9818
"NEC did good work, turn around time was fast, good experience all around. "
Steve C on June 2025
F & D Development Company, Inc.
F & D Development Company, Inc.
Turning Dreams into Reality. Your home may well be the most complex, interesting, and expensive project you'll ever undertake. Architectural designers are educated to help you define your needs, present options you may never have considered, and help you get the most for your valuable investment. There is a certain magic that can be seen and felt in homes created through the close working relationship between owner and designer. At F & D Development Company, Inc., we've been specializing in residential architecture since 1990. We listen carefully to our clients and strive to integrate your needs and dreams with your budget. We work with each of our clients to create a total home environment, both interior and exterior that is visually interesting and exciting as well as functional. We provide a range of residential architectural services to clients from complete architectural services for a new home to assistance with additions and remodeling.
"Prompt service, timely arrival. I expected a more extensive report but nonetheless it was short and to the point."
Janet G on March 2023
Turning Dreams into Reality. Your home may well be the most complex, interesting, and expensive project you'll ever undertake. Architectural designers are educated to help you define your needs, present options you may never have considered, and help you get the most for your valuable investment. There is a certain magic that can be seen and felt in homes created through the close working relationship between owner and designer. At F & D Development Company, Inc., we've been specializing in residential architecture since 1990. We listen carefully to our clients and strive to integrate your needs and dreams with your budget. We work with each of our clients to create a total home environment, both interior and exterior that is visually interesting and exciting as well as functional. We provide a range of residential architectural services to clients from complete architectural services for a new home to assistance with additions and remodeling.
"Prompt service, timely arrival. I expected a more extensive report but nonetheless it was short and to the point."
Janet G on March 2023
GTS Consultants
GTS Consultants
GTS Consultants has earned a reputation as a Minority Owned and Operated business since 1997. GTS Consultants are known for: -being highly regarded-with warm referrals -client responsiveness -professional surveyors -providing excellent communication -quick turnaround -competitive prices We have gained the respect and confidence of our clients by providing technical excellence and quality services throughout New York, New Jersey and Pennsylvania. Our corporate headquarters is located in the beautiful city of Newark, New Jersey. We look forward to hearing from and working with you soon.
GTS Consultants has earned a reputation as a Minority Owned and Operated business since 1997. GTS Consultants are known for: -being highly regarded-with warm referrals -client responsiveness -professional surveyors -providing excellent communication -quick turnaround -competitive prices We have gained the respect and confidence of our clients by providing technical excellence and quality services throughout New York, New Jersey and Pennsylvania. Our corporate headquarters is located in the beautiful city of Newark, New Jersey. We look forward to hearing from and working with you soon.
South Side Remodeling and Home Services
South Side Remodeling and Home Services
With years of experience our pro's offer the best service at affordable rates. Painting, drywall repair, tile flooring, appliance installation, trim and framing, foundation repair and waterproofing, basement waterproofing, custom and odd jobs. We're flexible and eager to help where we can.
With years of experience our pro's offer the best service at affordable rates. Painting, drywall repair, tile flooring, appliance installation, trim and framing, foundation repair and waterproofing, basement waterproofing, custom and odd jobs. We're flexible and eager to help where we can.
Raker Builders Co
Raker Builders Co
Full Service Contractor
Full Service Contractor
Effective Technical Applications, Inc.
Effective Technical Applications, Inc.
“ANGIE’S LIST DISCOUNT” – My Angie’s List Clients are given a ten percent (10%) discount on my Fee since Angie’s List does not charge businesses to list their services; therefore, my marketing cost is zero ($0.00) for my Angie’s List Clients. “FINANCING” – Clients are requested to make payment by check with sufficient funds on deposit to cover the check. Should the client be unable to make timely payment then their project is placed on hold until payment is received. The only penalty my Client incurs is loss of schedule, which they control with timely payment. No late fee ($0.00), no interest ($0.00), and no returned check fee ($0.00), is charged. “DESIGN/BUILD SERVICES FINANCING” – The cost of my services (Planning, Design, Engineering, Plans Drafting – CAD, Construction Management, & Inspection) is built into the “Construction Cost”; therefore, my services can be financed over the life of my Client’s mortgage. “EMPLOYEES” – Jonathan A. Snyder is a self-employed Professional Engineer, company of 1 person, who is networked with other qualified designers, engineers, and construction professionals. “PLANS PAYMENT” – Construction Plans are provided on either a “Fixed Fee” or “Not to Exceed Time & Expense” basis, payable in three (3) installments; 1/3 due at “Contract Signing”, 1/3 due at “Planning / Design Review”, 1/3 (or balance) due at “Delivery of Completed Plans”. “DESIGN/BUILD” – “SUB-CONTRACTING” and “PAYMENT”: LABOR – Construction Labor is bid by a minimum of three (3) Sub-contractors; all Bids are reviewed and presented to the Building Owner with recommendation on the “Lowest Qualifying Bid”; the Bid is awarded (Sub-contracted) to the contractor preferred by the Building Owner. MATERIALS – Quotes for all Construction Materials are obtained from a minimum of three (3) suppliers; all Quotes are reviewed and presented to the Building Owner with recommendation on best “Supplier”; Material Purchase Orders are awarded to the supplier preferred by the Building Owner. ENGINEER’S FEE – Engineer’s Fee includes the cost of Planning, Design, Engineering, Plans Drafting (CAD), Construction Management, & Inspection and is provided on a fixed percentage basis of the “Actual Labor & Materials Cost” (“AL&MC”); 1/3 due at contract signing based on the “Estimated Labor & Materials Cost” (“EL&MC”) for the project; the remaining balance is paid at each “Construction Draw” and based on the “AL&MC”. The Engineer’s Fee limit is set at time of contract signing based on the “EL&MC”. The Engineer’s Fee is reduced if the “AL&MC” is less than “EL&MC”; the Engineer’s Fee is not increased if the “AL&MC” is greater than “EL&MC” used at Contract Signing. “CHANGE ORDERS”: MUNICIPAL AUTHORITY OPINION: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are not based on a “Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or an International Code Council Code (ICC I-Codes) References and are based on the “Reviewing Authority’s Opinion / Preferred Method” are provided on an “Engineering Change Order Basis”. MUNICIPAL AUTHORITY CITED ORDINANCE or STATUTE REFERENCE: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are based on a “Cited Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or International Code Council Codes (ICC I-Codes) References are provided at no charge to my Client. NO SCOPE CHANGE – All “Plan Changes” within the Contract Scope of Work (i.e. Change a room layout) requested prior to “Final Plans Issue” are provide at no additional charge ($0.00). SCOPE CHANGE – All “Plan Changes” not within the Contract Scope of Work (i.e. Increase in floor area or add an addition to an existing building renovation project) and requested prior to “Final Plans Issue” are provide on an “Engineering Change Order” basis at an additional “Engineering Fee”. CONSTRUCTION CHANGE – All “Plan Changes” requested after “Final Plans Issued” are provided on an “Engineering Change Order” basis at additional “Engineering Fee” plus a “Construction Change Order” is required if either the associated construction “Labor” was sub-contracted or “Materials” were purchased. CONSTRUCTION ERRORS (Failed Inspections) – All “Construction Errors” cited by either the “Municipality’s Inspection Authorities” or the “Engineer of Record” shall be corrected by the Sub-contractor at no cost ($0.00) to my Client. “PLANS FORMAT” – All Plans (Building Shell, Electrical, Floor Plans, Mechanical, Plumbing, Security System, Site, Sprinkler, and Structural) are provided in a format that enables either Jonathan or the Client to self-perform Construction Management (Bidding, Contracting, Change Order Management, and Inspection).
“ANGIE’S LIST DISCOUNT” – My Angie’s List Clients are given a ten percent (10%) discount on my Fee since Angie’s List does not charge businesses to list their services; therefore, my marketing cost is zero ($0.00) for my Angie’s List Clients. “FINANCING” – Clients are requested to make payment by check with sufficient funds on deposit to cover the check. Should the client be unable to make timely payment then their project is placed on hold until payment is received. The only penalty my Client incurs is loss of schedule, which they control with timely payment. No late fee ($0.00), no interest ($0.00), and no returned check fee ($0.00), is charged. “DESIGN/BUILD SERVICES FINANCING” – The cost of my services (Planning, Design, Engineering, Plans Drafting – CAD, Construction Management, & Inspection) is built into the “Construction Cost”; therefore, my services can be financed over the life of my Client’s mortgage. “EMPLOYEES” – Jonathan A. Snyder is a self-employed Professional Engineer, company of 1 person, who is networked with other qualified designers, engineers, and construction professionals. “PLANS PAYMENT” – Construction Plans are provided on either a “Fixed Fee” or “Not to Exceed Time & Expense” basis, payable in three (3) installments; 1/3 due at “Contract Signing”, 1/3 due at “Planning / Design Review”, 1/3 (or balance) due at “Delivery of Completed Plans”. “DESIGN/BUILD” – “SUB-CONTRACTING” and “PAYMENT”: LABOR – Construction Labor is bid by a minimum of three (3) Sub-contractors; all Bids are reviewed and presented to the Building Owner with recommendation on the “Lowest Qualifying Bid”; the Bid is awarded (Sub-contracted) to the contractor preferred by the Building Owner. MATERIALS – Quotes for all Construction Materials are obtained from a minimum of three (3) suppliers; all Quotes are reviewed and presented to the Building Owner with recommendation on best “Supplier”; Material Purchase Orders are awarded to the supplier preferred by the Building Owner. ENGINEER’S FEE – Engineer’s Fee includes the cost of Planning, Design, Engineering, Plans Drafting (CAD), Construction Management, & Inspection and is provided on a fixed percentage basis of the “Actual Labor & Materials Cost” (“AL&MC”); 1/3 due at contract signing based on the “Estimated Labor & Materials Cost” (“EL&MC”) for the project; the remaining balance is paid at each “Construction Draw” and based on the “AL&MC”. The Engineer’s Fee limit is set at time of contract signing based on the “EL&MC”. The Engineer’s Fee is reduced if the “AL&MC” is less than “EL&MC”; the Engineer’s Fee is not increased if the “AL&MC” is greater than “EL&MC” used at Contract Signing. “CHANGE ORDERS”: MUNICIPAL AUTHORITY OPINION: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are not based on a “Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or an International Code Council Code (ICC I-Codes) References and are based on the “Reviewing Authority’s Opinion / Preferred Method” are provided on an “Engineering Change Order Basis”. MUNICIPAL AUTHORITY CITED ORDINANCE or STATUTE REFERENCE: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are based on a “Cited Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or International Code Council Codes (ICC I-Codes) References are provided at no charge to my Client. NO SCOPE CHANGE – All “Plan Changes” within the Contract Scope of Work (i.e. Change a room layout) requested prior to “Final Plans Issue” are provide at no additional charge ($0.00). SCOPE CHANGE – All “Plan Changes” not within the Contract Scope of Work (i.e. Increase in floor area or add an addition to an existing building renovation project) and requested prior to “Final Plans Issue” are provide on an “Engineering Change Order” basis at an additional “Engineering Fee”. CONSTRUCTION CHANGE – All “Plan Changes” requested after “Final Plans Issued” are provided on an “Engineering Change Order” basis at additional “Engineering Fee” plus a “Construction Change Order” is required if either the associated construction “Labor” was sub-contracted or “Materials” were purchased. CONSTRUCTION ERRORS (Failed Inspections) – All “Construction Errors” cited by either the “Municipality’s Inspection Authorities” or the “Engineer of Record” shall be corrected by the Sub-contractor at no cost ($0.00) to my Client. “PLANS FORMAT” – All Plans (Building Shell, Electrical, Floor Plans, Mechanical, Plumbing, Security System, Site, Sprinkler, and Structural) are provided in a format that enables either Jonathan or the Client to self-perform Construction Management (Bidding, Contracting, Change Order Management, and Inspection).
kieffer construction
kieffer construction
In business twenty five plus years,we offer very fair prices in todays economy,discounts offered for,senior citizens,military,and return clients.All work done in a timely manner.Satisfaction guaranteed.
In business twenty five plus years,we offer very fair prices in todays economy,discounts offered for,senior citizens,military,and return clients.All work done in a timely manner.Satisfaction guaranteed.
Metal Supermarkets
Metal Supermarkets
Metal Supermarkets is the world’s largest supplier of small quantity metals and offers a number of beneficial features, including: No minimum order Over 8,000 metal products, shapes and grades Unsurpassed Service! Cut to size Fast delivery or local pickup I have also attached a line card indicating our metal products and services. Not sure what you need? Our friendly, knowledgeable associates are ready to help. Call us for more information 410-918-0199.
Metal Supermarkets is the world’s largest supplier of small quantity metals and offers a number of beneficial features, including: No minimum order Over 8,000 metal products, shapes and grades Unsurpassed Service! Cut to size Fast delivery or local pickup I have also attached a line card indicating our metal products and services. Not sure what you need? Our friendly, knowledgeable associates are ready to help. Call us for more information 410-918-0199.
The Pottsville, PA homeowners’ guide to structural engineering services
From average costs to expert advice, get all the answers you need to get your job done.
The cost of a structural engineer is easily justifiable given the value they bring to the table. Use this guide to see what hiring your professional will total.
Looking to remove load-bearing walls and vertical supports to open up your living space? Learn about what affects the cost to install an LVL beam.
Need to open up your living space or make room for a home addition? Use this guide to estimate the cost to remove a wall in your home before you start.
It can be hard to choose the right pro for any job, but it matters. Learn how to hire a structural engineer who'll get the job done right from start to finish.
A squeaky floor may just be an annoyance, or it may signal a structural problem. Learn when to be concerned about a squeaky floor.
Structural steel and wood beams ensure your house is structurally sound. Learn the difference between steel and wood beams and how to choose the right one.
- Palo Alto, PA Structural engineers
- Minersville, PA Structural engineers
- Cressona, PA Structural engineers
- Port Carbon, PA Structural engineers
- Schuylkill Haven, PA Structural engineers
- Saint Clair, PA Structural engineers
- Auburn, PA Structural engineers
- Frackville, PA Structural engineers
- Gordon, PA Structural engineers
- New Philadelphia, PA Structural engineers
- Girardville, PA Structural engineers
- Orwigsburg, PA Structural engineers
- Deer Lake, PA Structural engineers
- Gilberton, PA Structural engineers
- Ashland, PA Structural engineers
- Tremont, PA Structural engineers
- Zerbe, PA Structural engineers
- Shenandoah, PA Structural engineers
- Mahanoy, PA Structural engineers
- Mahanoy City, PA Structural engineers
- Hegins, PA Structural engineers
- Tuscarora, PA Structural engineers
- Ringtown, PA Structural engineers
- Pine Grove, PA Structural engineers
- Shartlesville, PA Structural engineers
- Bethel, PA Structural engineers
- Mount Carmel, PA Structural engineers
- Hamburg, PA Structural engineers
- Kulpmont, PA Structural engineers
- Marion Heights, PA Structural engineers