Get matched with top paving pros in Midland, PA

A 500-square-foot driveway can cost anywhere from $5,000 to $35,000, depending on the type of pavers you choose. Grass and concrete pavers are more affordable, while stone and cobblestone pavers are on the higher end of that price range. You’ll save some money by DIYing the installation, though we highly recommend sticking with a professional for this type of driveway installation.

The most common alternatives to a gravel driveway are concrete, asphalt, brick, and permeable pavers. Concrete and asphalt are the two more affordable alternatives, while the intricate design options of brick and permeable pavers make installation significantly more expensive. Similar to gravel, concrete isn’t the best driveway material for cold weather, as frigid temperatures can cause it to crack. Alternatively, asphalt is sensitive to heat, and driveways can become soft in areas with high temperatures and sun exposure. While brick and permeable pavers give homeowners curb appeal, the latter offers the added functionality of preventing flooding and reducing runoff water.

Three inches is a great thickness for a residential asphalt driveway that sees minimal to moderate traffic from cars, SUVs, and pickup trucks. However, a thicker driveway can better withstand the weight of a heavier vehicle, such as a trailer or a recreational vehicle. If you drive a heavy vehicle on a thin driveway, you risk cracking and damaging it.

Professional installers often include a deep layer of crushed gravel under permeable pavers to allow more runoff to soak through into the soil below. Many installations will include multiple layers of gravel, with coarser aggregate at the base and finer aggregate that sits on top of that bottom layer. Above the gravel, you’ll often find coarse sand that helps reduce paver shifting over time. Some permeable paver designs include a water collection system set into the gravel layer to route runoff to a safe area for disposal.