Get matched with top drywall pros in Kane, PA

In most cases, walls don’t have to be removed to rewire a house. Much of the new wiring can be run through attics and crawlspaces, and then electricians often use a tool called fish tape to pull the cables through the walls via cut access points that can be easily patched up without requiring any major demo work.

It’s a pretty good idea to have drywall corners, also called drywall beading. Drywall is a pretty brittle material and corners tend to be rubbed up against it often. Rather quickly, the edges will start crumbling and you’ll need to replace the entire panel, or add beads on top and repaint the wall. Drywall beads—which are inexpensive—provide long-term support for the drywall and protect your investment.

You may need to replace drywall because of smoke damage. If the drywall is covered in soot, you may be able to clean it, but it will require a lot of time and effort. You could spend hours cleaning the drywall only to find there is more damage and it needs to be replaced anyway. It’s usually easier and safer to remove the smoke-damaged drywall and replace it.

Bump-out additions can add some space to a closet without requiring any significant structural work. This entails pushing back the existing rear or side of the closet, simply moving the wall into either an adjacent room or unused space. For ground-floor closets, this could even be extended to the exterior of the home, but that has its own complications. Bump-outs are a good discussion to have with your contractor if you’re just looking to increase the space a little—not renovate the entire closet space.