Get matched with top fencing pros in Blooming Valley, PA

Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.

One of the best alternatives to a snow fence is to plant a living snow fence of grasses, shrubs, trees, and crops like corn. Another temporary option is using hay bales to create a barrier to disrupt the wind flow, and cause snow to accumulate in specific areas. However, hay bales are not a permanent option, so keep that in mind when choosing what type of snow fence you should install.

A fence installer or homeowner should place a snow fence upwind of the desired drift area, while keeping the prevailing wind direction in mind. When installing a snow fence, its posts should be sturdy, as they will be the weakest areas in terms of tensile strength. Posts should be buried at one-third their height and placed no more than eight feet apart.

A metal fence can last for over 30 years if maintained correctly, though the exact lifespan varies by material. For instance, chain-link and aluminum fences can function well for 25 to 30 years, while corrugated metal fences may last up to 60 years with regular maintenance. The lifespan can be shortened by harsh weather, abuse, or lower-quality materials. Galvanized metal tends to last longer due to its protective barrier, whereas sheet and corrugated metal may rust faster than solid pieces.