Top-rated architects.

Get matched with top architects in Bernville, PA

There are 0 highly-rated local architects.

Need a pro for your architectural service project in Bernville, PA?

Select your specific project to find the pro for you.

Find Architects in Bernville

Avatar for Stoppi Engineering

Stoppi Engineering

107 Fox Hill Dr
5.00(
6
)
•Approved Pro

Stoppi Engineering

107 Fox Hill Dr
5.00(
6
)
•Approved Pro
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers
32 local quotes requested

I am a professional engineer who has expertise in residential structural engineering, home inspection, architectural engineering, and building codes. I get involved in projects where professional structural engineering considerations are involved or that were unveiled during home inspections. I can also perform home inspections as a professional engineer. I am an expert in all building codes and can convey pathways to building code compliance to contractors and homeowners. I perform design work as an architectural engineer (similar to an architect). If a project involves only plans and not a site presence, I can perform work for the entire state and surrounding states. I am a licensed engineer in 34 states.

"I am currently in the process of removing a load bearing wall for my home. I reached out to John P Stoppi for assistance with a support load calculation and sizing of a clear span beam. John was very helpful throughout the whole process."

Christopher G on December 2018

I am a professional engineer who has expertise in residential structural engineering, home inspection, architectural engineering, and building codes. I get involved in projects where professional structural engineering considerations are involved or that were unveiled during home inspections. I can also perform home inspections as a professional engineer. I am an expert in all building codes and can convey pathways to building code compliance to contractors and homeowners. I perform design work as an architectural engineer (similar to an architect). If a project involves only plans and not a site presence, I can perform work for the entire state and surrounding states. I am a licensed engineer in 34 states.

"I am currently in the process of removing a load bearing wall for my home. I reached out to John P Stoppi for assistance with a support load calculation and sizing of a clear span beam. John was very helpful throughout the whole process."

Christopher G on December 2018


Avatar for Evolution Drafting

Evolution Drafting

1185 Utah Ave. Suite 107
3.97(
33
)
•Approved Pro

Evolution Drafting

1185 Utah Ave. Suite 107
3.97(
33
)
•Approved Pro
Customers say: Terrific value
3065 local quotes requested
7 years of experience

Our firm is a dynamic provider of drafting and house plan services, dedicated to turning your visions into tangible and pleasing structures. With a commitment to excellence, we bring expertise and innovation to every project we undertake. We specialize in comprehensive drafting services tailored to meet diverse client needs. Our offering include: Design: Crafting unique and functional designs that blend creativity with practicality. Drafting Services: Precision and attention to detail in creating accurate and detailed drafts for seamless project execution. 3D Modeling: Bringing designs to life with realistic 3D models that provide a vivid preview of the final structure. Project Management: From concept to completion, we offer end-to-end project management ensuring timely and efficient delivery. Interior Design: Enhancing spaces with innovative interior designs that harmonize aesthetics and functionality. Detail Services Offered: - Building Code Compliance - Construction Documentation - Renovation and Remodeling Plans About our Team: Our team comprises draftsman and project managers, each bringing a unique skill, style and experience to the table. Collaborative teamwork and alliance is at the core of our success, ensuring a holist approach to every project. We take pride in our commitment to delivering high-quality work on every project. Our rigorous quality control measures, pays attention to client requirements, and adherence to industry standards are the cornerstones of our success. Your satisfaction is our top priority and guarantee. At Evolution Drafting, we don't design structures; we create environments that inspire and endure. Work with us and experience the art of living.

"slow response times. no onsite visit, so had to confirm all measures myself. good product in the end."

Jim E on September 2025

Our firm is a dynamic provider of drafting and house plan services, dedicated to turning your visions into tangible and pleasing structures. With a commitment to excellence, we bring expertise and innovation to every project we undertake. We specialize in comprehensive drafting services tailored to meet diverse client needs. Our offering include: Design: Crafting unique and functional designs that blend creativity with practicality. Drafting Services: Precision and attention to detail in creating accurate and detailed drafts for seamless project execution. 3D Modeling: Bringing designs to life with realistic 3D models that provide a vivid preview of the final structure. Project Management: From concept to completion, we offer end-to-end project management ensuring timely and efficient delivery. Interior Design: Enhancing spaces with innovative interior designs that harmonize aesthetics and functionality. Detail Services Offered: - Building Code Compliance - Construction Documentation - Renovation and Remodeling Plans About our Team: Our team comprises draftsman and project managers, each bringing a unique skill, style and experience to the table. Collaborative teamwork and alliance is at the core of our success, ensuring a holist approach to every project. We take pride in our commitment to delivering high-quality work on every project. Our rigorous quality control measures, pays attention to client requirements, and adherence to industry standards are the cornerstones of our success. Your satisfaction is our top priority and guarantee. At Evolution Drafting, we don't design structures; we create environments that inspire and endure. Work with us and experience the art of living.

"slow response times. no onsite visit, so had to confirm all measures myself. good product in the end."

Jim E on September 2025


Yoder Construction LLC

328 Albright Rd
5.00(
15
)

Yoder Construction LLC

328 Albright Rd
5.00(
15
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

With over 25 years of professional construction experience, we are here to assist you with any roofing, siding, pole barn, additions and barn remodeling needs you may have.

"Leroy and Michael Yoder were a pleasure to work with. They understood our needs and expertly tied the new roof into the existing house. They stayed with the job until it was completed and cleaned everything up. Highly recommended!"

Duane K on November 2020

With over 25 years of professional construction experience, we are here to assist you with any roofing, siding, pole barn, additions and barn remodeling needs you may have.

"Leroy and Michael Yoder were a pleasure to work with. They understood our needs and expertly tied the new roof into the existing house. They stayed with the job until it was completed and cleaned everything up. Highly recommended!"

Duane K on November 2020


Christian Architects

950 N Charlotte St
No reviews yet

Christian Architects

950 N Charlotte St
No reviews yet

My company provides economical and friendly architectural services, for residential and commercial buildings, varying in scope from small residential additions, or renovations, to large-scale retail centers. We can begin with your ideas to produce a schematic design, that may be used for pricing, and then develop into a set of drawings for permit approval and construction. I am a licensed architect, and will travel anywhere to your project to give you the best possible service and advice throughout the entire process. I look forward to working with you!

My company provides economical and friendly architectural services, for residential and commercial buildings, varying in scope from small residential additions, or renovations, to large-scale retail centers. We can begin with your ideas to produce a schematic design, that may be used for pricing, and then develop into a set of drawings for permit approval and construction. I am a licensed architect, and will travel anywhere to your project to give you the best possible service and advice throughout the entire process. I look forward to working with you!


Shine Family Construction

358 Hedge Rd
No reviews yet

Shine Family Construction

358 Hedge Rd
No reviews yet
Free onsite estimate

Shine Family Construction is owned and operated by Joe Shine, a 3rd generation stone Mason, and provides all the following services to the greater Philadelphia area. Masonry, concrete, excavating, new/old structural, drainage, Design, and landscape. The Shine family has specialized in the repair of historical masonry for over 50years.

Shine Family Construction is owned and operated by Joe Shine, a 3rd generation stone Mason, and provides all the following services to the greater Philadelphia area. Masonry, concrete, excavating, new/old structural, drainage, Design, and landscape. The Shine family has specialized in the repair of historical masonry for over 50years.



R2Daughters Contracting

1312 Long Run Road
No reviews yet

R2Daughters Contracting

1312 Long Run Road
No reviews yet
12 years of experience

R2Daughters Contracting is committed to building satisfaction with our reliable, affordable and quality home improvements and sustainable property design. We are the innovators of Eco-V Green Methods that include eco-friendly solutions that include; solar paneling, windmill energy, stored and filtered water systems and eco-building design for home remodeling and small additions.

R2Daughters Contracting is committed to building satisfaction with our reliable, affordable and quality home improvements and sustainable property design. We are the innovators of Eco-V Green Methods that include eco-friendly solutions that include; solar paneling, windmill energy, stored and filtered water systems and eco-building design for home remodeling and small additions.


Fountainhead Design Services

576 Hall Rd
No reviews yet

Fountainhead Design Services

576 Hall Rd
No reviews yet
20 years of experience

Single owner/operator. I have an Associates of Specialized Technology degree in Drafting and Design. 10 years field experience as a residential carpenter. Drafting professionally for 9 years. Standard billing is 50% on contract, 50% on completion.

Single owner/operator. I have an Associates of Specialized Technology degree in Drafting and Design. 10 years field experience as a residential carpenter. Drafting professionally for 9 years. Standard billing is 50% on contract, 50% on completion.


Effective Technical Applications, Inc.

10 Wayne Avenue
No reviews yet

Effective Technical Applications, Inc.

10 Wayne Avenue
No reviews yet
27 years of experience

“ANGIE’S LIST DISCOUNT” – My Angie’s List Clients are given a ten percent (10%) discount on my Fee since Angie’s List does not charge businesses to list their services; therefore, my marketing cost is zero ($0.00) for my Angie’s List Clients. “FINANCING” – Clients are requested to make payment by check with sufficient funds on deposit to cover the check. Should the client be unable to make timely payment then their project is placed on hold until payment is received. The only penalty my Client incurs is loss of schedule, which they control with timely payment. No late fee ($0.00), no interest ($0.00), and no returned check fee ($0.00), is charged. “DESIGN/BUILD SERVICES FINANCING” – The cost of my services (Planning, Design, Engineering, Plans Drafting – CAD, Construction Management, & Inspection) is built into the “Construction Cost”; therefore, my services can be financed over the life of my Client’s mortgage. “EMPLOYEES” – Jonathan A. Snyder is a self-employed Professional Engineer, company of 1 person, who is networked with other qualified designers, engineers, and construction professionals. “PLANS PAYMENT” – Construction Plans are provided on either a “Fixed Fee” or “Not to Exceed Time & Expense” basis, payable in three (3) installments; 1/3 due at “Contract Signing”, 1/3 due at “Planning / Design Review”, 1/3 (or balance) due at “Delivery of Completed Plans”. “DESIGN/BUILD” – “SUB-CONTRACTING” and “PAYMENT”: LABOR – Construction Labor is bid by a minimum of three (3) Sub-contractors; all Bids are reviewed and presented to the Building Owner with recommendation on the “Lowest Qualifying Bid”; the Bid is awarded (Sub-contracted) to the contractor preferred by the Building Owner. MATERIALS – Quotes for all Construction Materials are obtained from a minimum of three (3) suppliers; all Quotes are reviewed and presented to the Building Owner with recommendation on best “Supplier”; Material Purchase Orders are awarded to the supplier preferred by the Building Owner. ENGINEER’S FEE – Engineer’s Fee includes the cost of Planning, Design, Engineering, Plans Drafting (CAD), Construction Management, & Inspection and is provided on a fixed percentage basis of the “Actual Labor & Materials Cost” (“AL&MC”); 1/3 due at contract signing based on the “Estimated Labor & Materials Cost” (“EL&MC”) for the project; the remaining balance is paid at each “Construction Draw” and based on the “AL&MC”. The Engineer’s Fee limit is set at time of contract signing based on the “EL&MC”. The Engineer’s Fee is reduced if the “AL&MC” is less than “EL&MC”; the Engineer’s Fee is not increased if the “AL&MC” is greater than “EL&MC” used at Contract Signing. “CHANGE ORDERS”: MUNICIPAL AUTHORITY OPINION: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are not based on a “Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or an International Code Council Code (ICC I-Codes) References and are based on the “Reviewing Authority’s Opinion / Preferred Method” are provided on an “Engineering Change Order Basis”. MUNICIPAL AUTHORITY CITED ORDINANCE or STATUTE REFERENCE: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are based on a “Cited Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or International Code Council Codes (ICC I-Codes) References are provided at no charge to my Client. NO SCOPE CHANGE – All “Plan Changes” within the Contract Scope of Work (i.e. Change a room layout) requested prior to “Final Plans Issue” are provide at no additional charge ($0.00). SCOPE CHANGE – All “Plan Changes” not within the Contract Scope of Work (i.e. Increase in floor area or add an addition to an existing building renovation project) and requested prior to “Final Plans Issue” are provide on an “Engineering Change Order” basis at an additional “Engineering Fee”. CONSTRUCTION CHANGE – All “Plan Changes” requested after “Final Plans Issued” are provided on an “Engineering Change Order” basis at additional “Engineering Fee” plus a “Construction Change Order” is required if either the associated construction “Labor” was sub-contracted or “Materials” were purchased. CONSTRUCTION ERRORS (Failed Inspections) – All “Construction Errors” cited by either the “Municipality’s Inspection Authorities” or the “Engineer of Record” shall be corrected by the Sub-contractor at no cost ($0.00) to my Client. “PLANS FORMAT” – All Plans (Building Shell, Electrical, Floor Plans, Mechanical, Plumbing, Security System, Site, Sprinkler, and Structural) are provided in a format that enables either Jonathan or the Client to self-perform Construction Management (Bidding, Contracting, Change Order Management, and Inspection).

“ANGIE’S LIST DISCOUNT” – My Angie’s List Clients are given a ten percent (10%) discount on my Fee since Angie’s List does not charge businesses to list their services; therefore, my marketing cost is zero ($0.00) for my Angie’s List Clients. “FINANCING” – Clients are requested to make payment by check with sufficient funds on deposit to cover the check. Should the client be unable to make timely payment then their project is placed on hold until payment is received. The only penalty my Client incurs is loss of schedule, which they control with timely payment. No late fee ($0.00), no interest ($0.00), and no returned check fee ($0.00), is charged. “DESIGN/BUILD SERVICES FINANCING” – The cost of my services (Planning, Design, Engineering, Plans Drafting – CAD, Construction Management, & Inspection) is built into the “Construction Cost”; therefore, my services can be financed over the life of my Client’s mortgage. “EMPLOYEES” – Jonathan A. Snyder is a self-employed Professional Engineer, company of 1 person, who is networked with other qualified designers, engineers, and construction professionals. “PLANS PAYMENT” – Construction Plans are provided on either a “Fixed Fee” or “Not to Exceed Time & Expense” basis, payable in three (3) installments; 1/3 due at “Contract Signing”, 1/3 due at “Planning / Design Review”, 1/3 (or balance) due at “Delivery of Completed Plans”. “DESIGN/BUILD” – “SUB-CONTRACTING” and “PAYMENT”: LABOR – Construction Labor is bid by a minimum of three (3) Sub-contractors; all Bids are reviewed and presented to the Building Owner with recommendation on the “Lowest Qualifying Bid”; the Bid is awarded (Sub-contracted) to the contractor preferred by the Building Owner. MATERIALS – Quotes for all Construction Materials are obtained from a minimum of three (3) suppliers; all Quotes are reviewed and presented to the Building Owner with recommendation on best “Supplier”; Material Purchase Orders are awarded to the supplier preferred by the Building Owner. ENGINEER’S FEE – Engineer’s Fee includes the cost of Planning, Design, Engineering, Plans Drafting (CAD), Construction Management, & Inspection and is provided on a fixed percentage basis of the “Actual Labor & Materials Cost” (“AL&MC”); 1/3 due at contract signing based on the “Estimated Labor & Materials Cost” (“EL&MC”) for the project; the remaining balance is paid at each “Construction Draw” and based on the “AL&MC”. The Engineer’s Fee limit is set at time of contract signing based on the “EL&MC”. The Engineer’s Fee is reduced if the “AL&MC” is less than “EL&MC”; the Engineer’s Fee is not increased if the “AL&MC” is greater than “EL&MC” used at Contract Signing. “CHANGE ORDERS”: MUNICIPAL AUTHORITY OPINION: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are not based on a “Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or an International Code Council Code (ICC I-Codes) References and are based on the “Reviewing Authority’s Opinion / Preferred Method” are provided on an “Engineering Change Order Basis”. MUNICIPAL AUTHORITY CITED ORDINANCE or STATUTE REFERENCE: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are based on a “Cited Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or International Code Council Codes (ICC I-Codes) References are provided at no charge to my Client. NO SCOPE CHANGE – All “Plan Changes” within the Contract Scope of Work (i.e. Change a room layout) requested prior to “Final Plans Issue” are provide at no additional charge ($0.00). SCOPE CHANGE – All “Plan Changes” not within the Contract Scope of Work (i.e. Increase in floor area or add an addition to an existing building renovation project) and requested prior to “Final Plans Issue” are provide on an “Engineering Change Order” basis at an additional “Engineering Fee”. CONSTRUCTION CHANGE – All “Plan Changes” requested after “Final Plans Issued” are provided on an “Engineering Change Order” basis at additional “Engineering Fee” plus a “Construction Change Order” is required if either the associated construction “Labor” was sub-contracted or “Materials” were purchased. CONSTRUCTION ERRORS (Failed Inspections) – All “Construction Errors” cited by either the “Municipality’s Inspection Authorities” or the “Engineer of Record” shall be corrected by the Sub-contractor at no cost ($0.00) to my Client. “PLANS FORMAT” – All Plans (Building Shell, Electrical, Floor Plans, Mechanical, Plumbing, Security System, Site, Sprinkler, and Structural) are provided in a format that enables either Jonathan or the Client to self-perform Construction Management (Bidding, Contracting, Change Order Management, and Inspection).


D.A. Dale Building Designs

2086 New Danville Pike
No reviews yet

D.A. Dale Building Designs

2086 New Danville Pike
No reviews yet
45 years of experience

Since 1980, clients have hired the residential design studio of D.A. Dale Building Designs to provide architecturally correct designs based on the clients thoughts, ideas and needs, as well as budget. The final plans meet the Local Building Code for Permitting and construction of the project. Please view our web portfolio at www.DonDaleDesigns.com for some of our client Testimonials.

Since 1980, clients have hired the residential design studio of D.A. Dale Building Designs to provide architecturally correct designs based on the clients thoughts, ideas and needs, as well as budget. The final plans meet the Local Building Code for Permitting and construction of the project. Please view our web portfolio at www.DonDaleDesigns.com for some of our client Testimonials.

Showing 1-10 of 35
Architects questions, answered by experts

Designs typically take 2-6 months, depending on factoring, project size, and customization needs. Larger or more complex designs may require additional time for approval and revisions.

Utilize CAD software for precision, modern design visualization, and alterations.

Yes, you can finance cottage construction through several options. Construction loans provide funds in stages as work progresses, while home equity loans or lines of credit are available if you have existing property. Some lenders offer a combined construction and permanent mortgage. Always review loan terms and payment milestones before committing.

Federal and Colonial architecture are similar in that they both appear mostly utilitarian and symmetrical, but Federal architecture is a bit more ornate. Federal design often includes decorative palladium windows, window lintels, and, sometimes, columns surrounding a more decorative portico. Inside, Federal architecture is set apart by its centrally-located oval room. Additionally, Federal homes tend to have brick facades, whereas Colonial homes more often have wood siding.

Designing a building takes 2-6 months, depending on project size, required permits, and revisions.

By submitting this question, I acknowledge and agree that Angi may publicly display my name, city, state, and question on the website for professionals and others to see.

The Bernville, PA homeowners’ guide to architectural services

From average costs to expert advice, get all the answers you need to get your job done.