Best flooring contractors near Sutherlin, OR

If the installer is unwilling to fix the problems and you’re not interested in seeking remediation, you could hide a visually unpleasant floor. This will only work if the floor is structurally sound and the only issue you have is the way it looks. The easiest way to do this is to use large area rugs. You can also paint the floor, although that’s a labor-intensive job if you want to go the DIY route.

No, when done correctly, removing the tile shouldn’t damage the subfloor. However, if there was pre-existing damage to the subfloor from standard use or lack of maintenance, the subfloor may need repairs. For example, if the contractors notice mold growth on the subfloor or an uneven surface, you may need more extensive services before installing new tile.

If you DIY tile removal, remove the tiles one step at a time, individually removing the tile, grout, and mortar to prevent unnecessarily damaging the subfloor. Depending on the age of your home, consider having a professional inspect the subfloor to ensure it’s in good enough condition to lay new tile.

It’s possible to reuse household materials to cover floors, but they won’t provide the same level of protection as dedicated materials. They’re also more difficult to tape down and more prone to slipping and bunching up—and any dirt or debris on them could scratch or stain your floors. That being said, extra materials like these can be useful for protecting the sides of furniture and placing in areas that could use added protection.

Door transitions can work with virtually any flooring type; however, different transition strips lend themselves better to specific flooring types. For instance, if you are bridging the gap between a taller floor, like carpet, to a shorter floor, like hardwood, then you will want a transition strip with a slight slope to bridge the height difference. These transition strips are called reducer molding. On the other hand, if you are bridging two floors of the same height, you can use flat transition strips, such as T-strips and seam binders.