Get matched with top stucco pros in Lakeview, OR

Yes, you can screw directly into stucco. Only do so if the item you are installing is a permanent fixture. Drill a pilot hole into the stucco using a masonry or concrete bit, then drive in the screw with a power drill or screwdriver.

The cost to replace the chimney crown or top is about $1,550 on average. The range varies widely depending on the size of the chimney, the materials used, accessibility, and the extent of the damage. If you suspect a problem with your chimney top, call a professional masonry contractor for an inspection. 

When cleaning stucco siding, it is recommended to use a pressure washer with a psi (pounds per square inch) between 1,500 and 2,000. This range provides sufficient power to remove dirt and grime without causing damage to the stucco surface. It's important to avoid using excessive psi as it can chip or crack the stucco. 

Using a wider spray nozzle and keeping a safe distance of about seven to 10 feet from the siding helps ensure a gentle and effective cleaning process. Always follow the manufacturer's guidelines and adjust the psi accordingly based on the condition of your stucco and the specific requirements of your pressure washer.

All of the components of stucco are non-combustible, so the siding material won’t ignite or spread fire to the interior of your home. However, it also expands and contracts with changes in temperature, so it will crack from long exposure to heat. Eventually, fire will spread through those cracks. Still, stucco is one of the best siding materials for fire protection and can keep you and your family safe for an hour, on average.