Get matched with top door pros in Watonga, OK

WD-40 can be used on squeaky door hinges, but it is generally considered a temporary, short-term solution rather than a long-term fix. While it can silence a squeak in a pinch by breaking down rust and grime, it is not a true lubricant, as it contains only a small amount of lubricating oil that evaporates quickly. Using WD-40 alone may lead to the squeak returning and can attract dirt and dust, potentially causing more wear on the hinge over time. For a more effective and lasting solution, it is recommended to first use WD-40 to clean the hinge, then wipe it clean. Afterward, apply a dedicated lubricant such as silicone spray, white lithium grease, a metal or plastic lubricant, or an oil-based product like petroleum jelly.

You will need to cut or break a boomstick so it is wider than the door and long enough to anchor outside the door frame. Extend the broomstick horizontally under the doorknob, ensuring it's snug. Now using long screws and a drill, anchor the broomstick to the wall outside the door frame. Remember that you won't be able to open the door afterward. Do not proceed with this hack if your home has no alternative exit.

French doors that open to exterior spaces are often installed to swing inward, as this makes them more secure than outward-swinging doors, due to the interior hinges being inaccessible from the outside. For interior doors, it’s personal preference which direction to hang your doors, but it’s common to have them open into the larger of the two spaces they’re separating.

Standard door sizes aren’t one-size-fits-all, but there are common go-to dimensions. For exterior doors—like your front door—36 inches wide by 80 inches tall is typical, though you’ll see 30- or 32-inch widths too, especially in older homes. Interior doors vary more. Bedrooms and bathrooms often use 30- to 32-inch widths, and closet doors can be anything from slim singles to wide bi-folds. Height is usually 80 inches across the board; however, always measure your actual opening. “Standard” only works if it matches what’s already in place.