Get matched with top kitchen cabinet refacing pros in Tryon, OK

"Jesse at High Ground Solutions was great! He put together some garage cabinets we purchased, he was on time, didn’t take long, his charge was very reasonable and they looked great when he was done. He’s a pro!"

"We had a phenomenal installer named Nick Garcia who got our install done quickly and we are very satisfied. Our kitchen looks like something out of a magazine. Thank you Nick Garcia."

"Not your typical refinishing method, as they hand apply multiple coats of finish using microfiber cloths, speed drying them in between coats with heat. James was very professional and thorough in explaining his process. Using this method, you don't have to remove everything from your cabinets like you must with spraying. He didn't arrive in a fancy truck with logo--just a sedan with all his materials in the trunk. His drop cloths had clearly been used and reused, but they did the job. Do not be deterred --this may account for the very reasonable price quoted. James worked diligently to remove kitchen grease, lightly sand bad spots, and touch up areas where the stain and finish had worn away. He was polite and courteous throughout, and with the help of a second refinisher on day two, completed the project a couple hours short of two days. He gave me an opportunity to inspect the work before leaving, and also offered to return for additional touch up if needed. Although they will remove and replace your hardware, we waited 48 hours before replacing it ourselves, to ensure proper curing of the finish. It had been 15 years since we put in those cabinets, and James restored them to look like new. We can't really review the finish itself yet, but there is a 5-year warranty. We are overall quite pleased with this company."

"Antonio had his crew working at my home for 4 days. They were on time and Antonio inspected their work daily. Ortiz Custom Remodeling corrected the work on all my doors from an individual I hired prior. They did an excellent job. They had to cut out my bedroom door frame to install a 32" steel door and did that in an hour. I was amazed how quickly they installed it! They sanded, kilz and painted 6 interior doors, three double closet doors and one steel door. They removed the tri fold closest doors and framed in the double closet doors. All my doors fit perfectly and are beautiful. I'm so happy and plan to hire them again for my upcoming home improvement projects. They are awesome! I'm extremely grateful to all of them for their professionalism and kindness. I thank God that ANGi helped me find them. Ortiz stands above the rest of the companies and were also cheaper on the cost."

"The installer was friendly, professional, and took care not to damage the cabinets or stovetop. He was knowledgeable and asked if we had any questions. He was on time and called before he came to be sure we were ready for him. We would hire them again!"

At GP Cabinets & More, we bring over 20 years of combined experience in custom cabinetry, finish carpentry, trim work, and residential remodeling. We are committed to delivering exceptional craftsmanship, honest communication, and dependable service on every project. Whether it’s custom cabinets, interior trim, built-ins, or home renovations, we take pride in quality workmanship and attention to every detail. We proudly serve homeowners throughout Oklahoma and are willing to travel for the right project. Our mission is to exceed expectations by completing every job with professionalism, integrity, and lasting quality

Hi, my name is Jesus, and I am dedicated to providing dependable and professional service. I take pride in helping customers with their home projects, whether it’s assembly, repairs, moving, yard work, or general handyman tasks. I am hardworking, punctual, and detail-oriented, and I always strive to exceed expectations. My goal is to make every customer feel confident that the job will be done right the first time.

"They were great! Will definitely use them again. This one they will be my first call! Thank you stone solutions!"

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"It didn't. I use HandymanMatters of Lewisville."