Get matched with top tv mount installation pros in Perkins, OK

You will be placing holes in the wall to hang the mounting bracket. If you’re mounting a large TV, the bolts in use could make significant holes around half an inch in diameter. Other than a few holes, though, the process of mounting the TV should not cause significant damage to the wall, unless you make an error and miss the wall stud, tearing out drywall. Should you decide to remove the mount later, the DIY drywall repair cost for a small hole usually is $10 to $30. It’s a repair you can do in a few minutes.

Mounting a TV to a brick wall can be safe and secure if done correctly. However, it requires proper installation to ensure the TV is firmly attached and won't pose a risk of falling. Guarantee your television is safely secured by checking the manufacturer's weight limits of your TV mount and wall anchors. Examine the condition and quality of the brick wall to ensure it is capable of sustaining the TV.

Coax cable connects to your television, modem, or cable box. Look for a female coax connection on these devices. Your coax cable will connect to any of these. The other end of the wire runs to the service connection coming into the house.

It’s highly recommended to use studs for a TV mount. The last thing you want is to be watching your favorite show when the TV falls off the wall. Studs are much stronger than drywall and quite a bit stronger than drywall anchors but, if you can’t find the studs or there simply aren’t any where you need them, you can use drywall anchors. It’s extremely important to make sure the anchors are rated for the load of the TV. We recommend using anchors that are rated far beyond the weight of whatever you’re hanging. Our suggestion is metal drywall toggle anchors.