Get matched with top garbage removal pros in Colcord, OK

Once you have your garbage disposal disconnected, you can remove the mounting bracket by unscrewing the bolts that are holding the bracket. You can back them out just enough to pop off the snap ring, which prevents the bottom portion of the bracket from disconnecting from the top when you unscrew the bolts. Use a regular screwdriver to pop off the snap ring, and the rest of the components should fall off by themselves.

These appliances do unscrew, but you need to disconnect everything properly when you replace your garbage disposal. Make sure you shut the power off to the area first and check that it’s off with a voltage detector. Disconnect the main drain line and P-trap, and then disconnect the dishwasher drain line if you have one connected. You can then unscrew your garbage disposal using a disposal wrench. Just make sure you disconnect the electrical lines before removing your appliance.

There are many maintenance and repair issues that lead to a malfunctioning garbage disposal. Regular clogs place wear and tear on the motors, leading to an eventual shutdown. Electrical issues at the breaker, wall outlet, or disposal itself can fry the unit. The most common cause is simply a worn-down motor. These motors can only handle so much use before powering down for good. 

As with many appliances, proper maintenance is key to maximizing your garbage disposal’s life span. If everyone in your household is on board with proper care and maintenance, like running water while operating the disposal, you should get plenty of years out of your unit. Avoid putting the wrong food items down the disposal, including pasta, rice, bread, and more.