Get matched with top countertop and backsplash pros in Alex, OK

Yes, it is often possible to replace an undermount sink without removing the countertop, but success can depend on the countertop material. For materials like granite, the process is relatively straightforward. However, laminate or uniquely shaped countertops might need to be removed or modified.

The process typically involves shutting off the water supply, disconnecting the drain and plumbing pipes, cutting through the old silicone seal, and carefully lowering the sink from below. This requires a good understanding of plumbing and the right tools. If you are not confident in performing the replacement yourself, it is recommended to hire a countertop specialist or a plumber to handle the task.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Formica is a brand of laminate, so all Formica is laminate, but not all laminate is Formica. To identify it, look for a thin, plastic-like surface bonded to a wood or particleboard base. Formica often has branding on the underside. If you don’t see Formica, it could be Wilsonart, another familiar laminate brand. If the countertop is unique, you can visit the Formica site to find a match. Formica is known for creative collaborations that lead to unique design offerings.

There are many benefits of granite countertops, but it’s not unusual for them to have seams—especially if you’re working with small slabs joined together. Seams are common on larger islands where the installer needs to use more than one granite slab to cover the surface. Luckily, because seams are normal in granite countertops, pros know how to hide them properly, so you’d never know they were there.