Get matched with top countertop and backsplash pros in Wayne, OK

The angle at which you cut countertops depends on the material, your intended outcome, and the location of the cut. For example, rather than cutting a straight 90-degree angle for internal corners, cut edges at a 45-degree angle to give a clean, professional look. For outside edges, most homeowners want squared-off sides, so 90-degree angles can make the most sense there. Because you want to get angles exactly right to minimize seams and eliminate the need for patching, be sure to measure several times before cutting and use the right equipment to get sharp, accurate angles.

Butcher block countertops typically last around 20 years, and sometimes longer, with proper maintenance. This lifespan is comparable to granite and longer than laminate. Key maintenance tasks include regular cleaning after every use and resealing, ideally once a month. You can also sand and resurface the countertops to remove imperfections like deep scratches, stains, dings, and scorch marks. The longevity is also affected by the thickness of the wood strips used in its construction; thicker strips are generally more durable.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The least porous countertop material is engineered quartz. Made from a blend of natural quartz and resins, it is non-porous and highly resistant to stains, scratches, and bacteria. This makes quartz countertops exceptionally low-maintenance and durable, ideal for kitchens and bathrooms where hygiene and easy upkeep are priorities. Other non-porous options include solid surface materials like Corian, which also offer excellent resistance to moisture and stains.