Get matched with top roofers in Ravenna, OH

You should hire a roofing professional to install a metal roof, as it’s an essential part of your home and a difficult installation. Your roof provides the most protection for your home among all of the building materials, and any mistakes made during the installation process can quickly lead to roof leaks, water damage, and significant repair costs. A roofing professional will ensure your new roof is installed properly and according to building code to minimize that risk, and they will usually back the installation and materials with a roof warranty for added peace of mind.

Rain shouldn’t come in through your ridge vents unless your vents are damaged or the rain is accompanied by very high winds. Most ridge vents use flashing or baffling to keep out rain, snow, and debris. If your ridge vent isn’t baffled, rain is more likely to enter your attic, so ridge vents with baffles are a better choice in areas with regular rainfall.

Furring strips (also called wood stripping) are not always necessary for a metal roof installation, but they are highly recommended and may be required by local building codes or the roofing manufacturer's specifications. There are several key reasons to use them:

• Energy Efficiency: Furring strips, made of wood or metal, create an air gap between the metal panels and the roof deck. This acts as a thermal break, reducing heat transfer into your home and improving overall energy efficiency.

• Moisture and Condensation Control: The air gap allows for better airflow, which helps prevent moisture buildup and condensation under the metal panels.

• Structural Support: They provide a solid, even frame to which you can attach the metal roofing panels.

It is especially important to use furring strips when installing a metal roof over existing shingles. Without them, the roof surface can be uneven, and you will experience greater solar heat gain.

The principal, common, and auxiliary rafters are the most frequently used types of rafters. Principal rafters are large and typically appear toward the edges of the roof. Common rafters are smaller than principal rafters. Some people may use a mix of common and principal rafters. The auxiliary rafter is not common, but it provides extra reinforcement for a principal rafter on a large building.