Get matched with top countertop and backsplash pros in Laura, OH

The best tool for cutting countertops depends on the type of countertop material. For some softer materials, like laminate (Formica) and butcher block, you can use a hand saw, but most experts recommend power saws like circular saws, since these make the job go faster and easier and give more even results. However, power saws and circular saws are dangerous if used incorrectly, and they can be so powerful that they damage or chip laminate, stone, and other types of countertops. For this reason, you should take safety precautions and use best practices to prevent damage.

Most recycled glass countertops are nonporous, so they don’t require sealant. There is, however, one major exception. If your recycled glass countertop contains a cement binder, it’ll require an additional layer of protection. Seal these countertops once or twice a year. Use a concrete sealant and finish it with a food-safe wax for a gorgeous and shiny finish. Otherwise, just clean the countertop regularly and always use a cutting board.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Epoxy is the best sealer for concrete countertops. It fills in gaps, rough areas, and imperfections for a smooth finish and will usually last the life of the concrete. Other options include acrylic and polyurethane sealers, which protect the countertops from stains but must be reapplied every few years to maintain proper surface protection.