Get matched with top countertop and backsplash pros in Fletcher, OH

Small kitchens benefit from simple, blunt countertop edges, as complicated edges can create visual clutter and be more of a hazard if you bump into them. Eased edges are a top pick for small kitchens because they are simple, do not jut out, and do not take up additional space. Bullnose edge countertops are also popular because of their rounded design; they are elegantly simple and will not be sharp when you bump against them. Single-beveled edges are also a good choice, as they look a little more upscale but still have rounded edges for safety and simplicity.

Epoxy is typically more affordable than granite, especially if you’re choosing a high-end slab. Most granite countertops cost $75 to $145 per square foot to install, with high-end varieties topping $185 per square foot. 

In contrast, epoxy countertops cost $50 to $150 per square foot to install. The material costs for epoxy are significantly lower than granite, but installation costs can be higher. Rather than simply cutting granite countertops to size before installation, your contractor will need to carefully pour the epoxy over an existing surface.

The best tool for cutting countertops depends on the type of countertop material. For some softer materials, like laminate (Formica) and butcher block, you can use a hand saw, but most experts recommend power saws like circular saws, since these make the job go faster and easier and give more even results. However, power saws and circular saws are dangerous if used incorrectly, and they can be so powerful that they damage or chip laminate, stone, and other types of countertops. For this reason, you should take safety precautions and use best practices to prevent damage.

Installing new kitchen countertops costs $1,850 to $4,450, with an average price of $3,140. Some materials, like marble and granite, are more expensive than others. Additionally, the size of the countertop impacts the overall price. Labor accounts for 10% to 20% of the overall project cost. Add-ons, like edging and corner treatments, also increase the cost.