Best plumbers near Cairo, OH

The biggest sign that your flange leaks is if you notice water at the base of the toilet. The cause is likely due to a poor flange installation, so you might have issues with loose bolts, an uneven flange, or a cracked plastic flange. Add a deteriorating wax seal to this, and you have a recipe for disaster. The best solution is to shut off the water valve, replace the toilet flange, and seal it with a new wax ring.

While you may have some water, it's best to wait until after the repair is complete to use your home's pipes. For one thing, the water pressure will most likely be greatly reduced, leading to a less-than-intense shower. There's also the risk of contamination from dirt and bacteria that can enter the broken water main pipe. In many cases, a pro will turn off the flow of water from your water main to do the repairs, so showering won’t likely be an option.

A standard toilet flange should fit snugly into the outflow pipe and sit level with the subfloor. Installing a new one without first removing the old one will make it impossible to form a seal and keep the toilet bowl bolted securely in place. 

However, if you’re dealing with leakage or wobbling because you’ve installed a new type of bathroom tile (making the floor taller), you may be able to avoid fully replacing the flange by opting for a toilet flange extender. Extenders typically come in kits for easy DIY installation, fit over the existing flange, and bring the drain connection higher.

There are three main types of shower valves: pressure-balancing, thermostatic, and diverter. Pressure-balancing and thermostatic valves are both considered mixing valves because they regulate water flow and temperature, but they do so in different ways. A pressure-balancing valve senses changes in water pressure, such as from a flushing toilet, and adjusts the incoming hot and cold water to maintain a consistent temperature; these typically use a single knob. A thermostatic valve uses a thermostat to precisely control the water temperature and requires a separate control to adjust the water volume. A diverter valve directs the flow of water from one fixture to another, such as switching from a tub faucet to a showerhead in a tub-shower combination.