Get matched with top painters in Sanford, NY

Newer paint cans often come with an “easy pour” spout with a twist lid. These can be tricky to open, but the key is to grip the spout cover with your fingers and twist it counter-clockwise. There should be a raised ridge in the middle to make it easy to grab. For more standard twist lids, you can try prying the lid off by turning it with your hands, as you would a jar, or running it under warm water.

You can test to see if your mist coat has worked by using masking tape after the drying period. Apply masking tape to an inconspicuous area of the wall after the mist coat has had at least 24 hours to dry. Then, peel off the tape. It should come up clear, with no paint residue. If it does have paint residue, you may need to remove the mist coat and try coating the plaster again with a different ratio of paint and water.

Most bathroom walls will require two coats of paint, as this ensures proper coverage. If you’re painting over a darker color with a lighter color, you may need additional coats. If you’re just refreshing with the same shade, one coat of paint is usually fine. It’s a good idea to put down one to two coats of primer before painting to ensure the best results. This can also cut down on the need for additional coats if you’re painting over a darker color.

Painting behind a toilet requires extra attention and care, as the area is often tight and uncomfortable to reach. First, you should use painter's tape to seal off any areas that you don’t want to get paint on, and use a drop cloth on the floor. Then, use a small roller brush or foam brush to apply the paint, making sure to spread it evenly around corners and tight areas. For the best results, allow the paint to dry in between coats. Finally, after you have finished painting and allowed your work to dry completely, remove the painter’s tape carefully.