Get matched with top locksmiths in Ravena, NY

If your key breaks in a lock, first remain calm and avoid forcing the broken piece further in. You may be able to remove it yourself if a portion of the key is still protruding from the lock. To aid removal, lubricate the keyhole with a graphite-based spray. Then, try using tools like pliers, tweezers, a bobby pin, or even a jigsaw blade to gently grasp and pull the broken piece out. If these methods don't work, you can't reach the key, or you're concerned about damaging the lock, it's best to call a professional locksmith for assistance.

Rekeying is typically cheaper than replacing locks. Professional rekeying costs between $40 and $160, sometimes with an additional fee of $15 to $40 per lock. A locksmith's hourly rate averages around $75. If you do it yourself, a rekeying kit can cost as little as $10. In contrast, replacing a lock costs between $130 and $500, with an average of around $315, depending on the hardware and lock type. Rekeying is a simpler process that changes the key for your existing lock without replacing the hardware. It is a good option if you have a quality lock that works well, you've recently moved, you've lost a key, or you need a quick security upgrade. The best choice depends on the condition of your current locks.

Expect to pay between $50 to $200 if you hire a locksmith to change your locks. That figure includes labor and the cost of basic hardware. The cost will naturally be higher if you plan to install more expensive locks, like smart locks, and if you need a lot of them.

Homeowners can save money by replacing locks themselves. A typical rekeying kit costs about $10 to $25. The only additional cost is purchasing new house keys, and those are no more than a few dollars per key. If you want to replace the locks on your own completely, the main cost is the price of the locks themselves. A standard knob-style lock starts around $25, while electronic locks and smart locks will run in the hundreds of dollars. The only additional tools you should need are a tape measure, screwdriver, and screws if they are not already provided.

Lock bumping is a technique locksmiths use to quickly and quietly open a pin tumbler lock, typically found in most types of deadbolts. It involves inserting a specially crafted key, or bump key, into the lock and tapping or "bumping" it with a mallet or similar tool. The force applied causes the lock's pins to jump momentarily, allowing the lock to be turned and opened. Unfortunately, thieves also use this technique to break into homes. Luckily, products like a deadbolt strap will fortify your lock.