Get matched with top siding pros in Montezuma, NY

For the materials alone, a square of siding costs an average of $600, but prices can range from $100 to $3,000, depending on the material. Vinyl siding costs toward the lower end of that range, while real brick or stone siding costs closer to the higher end. Keep in mind that many boxes of siding contain two squares, enough to cover 200 square feet, so you may need to double your cost if you only need one square.

You should plan to stain or refinish your home's cedar siding every three to seven years to maintain its appearance and provide maximum protection, though some estimates suggest a range of four to six years. The exact frequency depends on several factors, including your local climate, exposure to severe weather like direct sunlight, rain, and wind, the quality of the initial stain application, the type of stain used, and the overall condition and quality of the wood.

For homes in harsh climates with high humidity and significant sun exposure, you should plan on staining as often as every three years, while those in milder locations may only need to do so every seven years. For the longest-lasting protection in particularly harsh climates, consider using an opaque stain.

If you are looking for a lower-maintenance alternative, you might consider vinyl or aluminum siding. While the initial installation cost can be higher, they do not require as much upkeep and can offer more value over time, especially in areas with excessive rainfall or high humidity.

A square of siding refers to 100 square feet of siding materials. Rather than sell by the individual square foot, manufacturers typically sell siding materials by the square. For instance, if you need 105 square feet of siding but the material is sold in squares, you’ll need to purchase two squares (200 square feet).

The recommended PSI (pounds per square inch) for cleaning vinyl siding can vary, so it's best to consult the manufacturer's guidelines. Generally, vinyl siding can handle high pressure, from 2,500 to 3,500 PSI. For comparison, more delicate materials like wood and aluminum siding should not face more than 1,500 PSI. To safely disperse the pressure on vinyl, use a tip with a wider spray span, such as a green (25-degree) or yellow (15-degree) nozzle. For routine cleaning of light dirt, a garden hose with a spray nozzle may be sufficient. Always exercise caution to avoid using excessive pressure that could damage the siding.