Get matched with top roofers in Monsey, NY

16-gauge galvanized steel staples with a minimum crown of 15/16 inches or 24 millimeters are occasionally used to install shingles. However, most shingle manufacturers or residential building codes don’t recommend staples as a roofing fastener. Roofing nails are preferred in most cases, especially in areas that get a lot of heavy wind.

Moving a chimney is possible, but it is a very complex process that requires professional expertise, knowledge of building codes, and safety protocols. Most homeowners find it easier to remove the fireplace and build a new fireplace and chimney in the new location of your home. Talk to your chimney pro about all your options, their costs, and pros and cons. 

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

There are several signs that indicate you’ll need new underlayment. Clear signs include missing or damaged roofing and exposing the underlayment to the elements. Additionally, if you notice water damage in your home by the roof after a storm, it could indicate that your underlayment may need to be replaced. If your gutters aren’t draining properly, it could also lead to rotting or water damage to the underlayment.