Top-rated carpenters.

Get matched with top carpenters in Locke, NY

Enter your zip and get matched with up to 5 pros

TRUSTED BY LOCKE, NY HOMEOWNERS

  • Average homeowner rating star icon4.5
    Average homeowner rating
  • Verified reviews icon11
    Verified carpentry services reviews

Find Carpenters in Locke

Avatar for Romeo's Service
Romeo's Service
4.5(
6
)
Deck or Porch - RepairExterior Shutters - Repair or RestoreExterior Shutters - Repair or Restore - For Business+1 more

Serving Locke, NY and surrounding areas

Approved

In business since 2023

Free estimates

Warranties offered

With 2 years of experience, Romeo's Service committed to excellence every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests and make their concerns the basis of our business. Call us today!

Response time2 days
Recommended by83%of homeowners
Avatar for Sentri Homes
Sentri Homes
2.4(
27
)
Carpentry Framing - Install

Serving Locke, NY and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."
26 neighbors recently requested a quote
Grady's Painting Plastering/Construction
2.0(
174
)
Exterior Shutters - Repair or RestoreWindow Frame - Repair

Serving Locke, NY and surrounding areas

Approved

In business since 1969

Free estimates

Emergency services offered

"It is with deep satisfaction that I recommend Grady?s Painting and Plastering & Construction. Mr. George Grady is a skilled craftsman. He was hired to correct long neglected and extensive masonry and window issues on a large, beautiful Presbyterian Church built in the Civil War era in Philadelphia. The property was neglected with only minimal maintenance performed over the last 40+ years. The building was in severe decline and in need of stabilization and restoration on many fronts. Cracked ledge plates were chipped out and reestablished, internal walls damaged by leakage were broken out and repaired, brickwork was repointed and in severe cases reestablished to original strength and beauty. Leaks around the base of the building were addressed to stabilize deterioration of the foundation. Large rotted window sills under beautiful stained glass windows were restored after significant masonry reestablishment due to water damage under the rotted out sills. Broken and missing stained glass windows are in the process of repair and replacement. The process started with new metal frames cast by Mr. Grady. The new frames will hold clear painted replications of the original stained glass, also crafted by Mr. Grady. Regular windows all around the church and manse were also repaired and restored. Roof leaks were accurately identified and repaired. A sagging plaster ceiling has been torn out and restored. All this work was done by Mr. Grady alone or with an occasional helper. He worked with care, expertise and respect for the original structure. The results far exceeded our expectations and have injected new life into a building on the brink. This building, owned by the Presbytery of Philadelphia, now houses a new urban ministry in a newly gentrifying area of the city. We are happy to have had the good fortune to be connected to Grady's Painting and Plastering & Construction"
Response time11 hrs
Response rate100%
Recommended by57%of homeowners
Avatar for R-Dubs Remodeling & Property Maintenance
R-Dubs Remodeling & Property Maintenance
New to Angi
Arbor, Pergola or Trellis - Build Custom - For BusinessExterior Shutters - Install or Replace - For BusinessExterior Shutters - Repair or Restore+3 more

Serving Locke, NY and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

My Name is RJ Williams (Owner/Carpenter) with R-Dubs Remodeling & Property Maintenance LLC, where we are here to provide various services for your most important and expensive investment. I have been remodeling homes starting with a flooring career, to windows & doors, kitchens & bathrooms and more. We pride ourselves on our care for our clients (communication & Cleanliness), competitive pricing, attention to details, and virtual (hassle-free) estimate/booking process.

Professional Trim Company
0.0(
1
)
Interior Trim and Decorative Moldings - Install

Serving Locke, NY and surrounding areas

Approved

In business since 1985

Free estimates

Professional Trim Company your one stop shop for all your home improvement needs. We are professional, efficient, and always get the job done right the first time. We go above and beyond to serve our customers, and pride ourselves on top notch quality work. Give us a call today for your free estimate. We'd love the chance to earn your business.

Response time6 days
Response rate87%
Recommended by100%of homeowners
Avatar for JoG Pressure Washing and Cleaning LLC
JoG Pressure Washing and Cleaning LLC
5.0(
9
)
Deck or Porch - Repair

Serving Locke, NY and surrounding areas

Free estimates

Emergency services offered

Credit card accepted

Prowash services available in hot or cold water! Brand new 2022 company with brand new equipment! Fully insured and registered! Very family oriented ! No job to big or small! Reach out today so my company can bring that shine back out! Looking forward to meeting you and take the best of care!! Thank you!

Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+29

Recommended by100%of homeowners
Avatar for MCE Construction
MCE Construction
4.7(
37
)
Deck or Porch - RepairGazebo or Freestanding Porch - RepairInterior Trim and Decorative Moldings - Repair

Serving Locke, NY and surrounding areas

In business since 2014

Free estimates

Emergency services offered

MCE Construction is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests and make their concerns the basis of our business.

Response time2 days
Recommended by93%of homeowners
Avatar for Arkansas Wood Doors
Arkansas Wood Doors
5.0(
8
)
Closet - Build

Serving Locke, NY and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"
Additional Photos
Additional Photos
.
Additional Photos
Additional Photos

+1

Recommended by100%of homeowners
...
Showing 1-10 of 115
Carpentry questions, answered by experts

When hanging a door frame, it’s recommended that you use screws, not nails. Screws are more secure, easier to tighten, and easier to remove if you need to adjust the frame. On average, the cost to replace a door frame is about $400, but you can save on labor costs if you’re confident in your ability to DIY the project. 

Proper Murphy bed installation minimizes the risk of wall damage. A secure attachment requires making some holes for anchors or brackets, but these can be easily patched if the bed is removed. To ensure the installation is done correctly and safely, hiring a professional is recommended, especially if you have limited DIY experience.

The cost to convert a carport into a garage averages about $22,000, ranging from about $15,000 and $55,000. Additional cost factors to consider include size, time of year, and how much of the carport you can reuse. Other cost factors include the kinds and amounts of materials used, such as:

  • Add insulation: $1 per square foot

  • Add drywall: $1–$3 per square foot

  • Add window: $450–$2,000 per window

  • Add outlets: $75–$500

  • Add garage door: $250–$11,200

  • Enclose framing: $5–$13 per square foot

  • Replace roofing: $1,000–$2,000

Framing a house with steel generally takes less time—around five to eight weeks—than most building materials. The steel components can also be made quickly off-site and manufactured with pre-punched holes for running piping and electrical wiring, which will lessen the prep work and extra labor during construction.

In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called "on-center" and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called "advanced framing". This requires careful planning and adherence to local building codes to ensure structural integrity.

The Locke, NY homeowners’ guide to carpentry services

From average costs to expert advice, get all the answers you need to get your job done.