"The team from The Climate Chief were very professional from day one. They laid out plastic sheeting to protect our recently refinished hard wood floors. Cleaned up any messes from the blown in insulation. Covered the doorway by utilizing TEVEC house wrap and tape so we would not lose much heat when the hoses were running. At the end of each day one of the employees would pick up the plastic sheeting and sweep the floors and they would pick up all the tools so not to leave a cluttered workplace inside and outside. Billy Mike, and crew were very happy and cheerful while at work. Very knowledgeable about how to seal up any of the existing open areas. They removed all the existing fiberglass insulation before replacing with 18 inches of cellulose R60. A very professional job we are very pleased to say. We noticed a warmer difference in room temperatures right away! We would strongly recommend them to others!"
Astar Heating & A/C Inc is a customer focused heating and air conditioning company that was originally started in 1976. Located in Middletown, NY, we employ highly trained people whose goal is to make our company the best service company in Orange County New York. Our company specializes in designing, engineering, and installing complete comfort systems for owners of existing homes and buildings just like yours. We take special pride in the craftsmen we train and employ a fact you'll notice immediately in the attitude and integrity they bring to your job site. Our entire company works hard to make your experience with us hassle-free and enjoyable. From the professionalism of our sales engineers, to the dedication of our field personnel, we are dedicated to delivering you the best. We take our responsibility very seriously when you place your trust in us. Additional DBA - Astar Heating & Air, LLC Additional email - [email protected] Additional phone - (845) 692-4858.
"Overall, excellent. We did encounter a few problems with the spray in wall insulation since the original sheet rock was just nailed in. A few sections bowed into the room. This is actually pretty common with old houses. The problem was quickly corrected, the walls properly secured, the insulation reinstalled (blown in) and the job completed. In modifications to a home, it is not always the problems you encounter, it is how you deal with them. Advance had the problem identified with a resolution that was completed within a day. Very pro-active!"
"R-Factor Insulation Company does very good work. They insulated my crawl space and did a wonderful job. The owner Mr. Knapp was very professional and came out and gave a free estimate on the work. The job estimate was right on the price with no cost over runs at the completion of the job. I had other estimates that were much higher on the same work to be done."
For years High Tech Construction Co. has been servicing its customers with efficiency, integrity, and Professionalism. Specializing in brownstone exterior restoration we strive to preserve historic brownstones from deterioration. Located in Brooklyn NY. Take tour of our website and gain insight into the core values and philosophies at High Tech Construction Co.
"Helpful, they made the project fun and easy. The finished product is great and has already made a difference - insulation of attic and garage has improved the temperature qualities of our bedroom."
We are extremely passionate about the work that we do. You can depend on us to provide a high quality service at a fair and honest price. We understand that the future of our business depends upon our reputation and that is why customer service is by far our highest priority. If you are looking for a professional you can trust, please call today to schedule a no-obligation estimate!
\n
\n
\n
\n7 years of experience.
\nFamily Owned and Operated
\nhigh yield
\nText Or Phone call for fastest response.
"The climate chief was very prompt to respond to our inquiry. Gary came out the next day, and took a look at our house and explained things throughly. We told him our budget, and that while we understood there were more areas for improvement than our budget allowed, he worked with us to assess and confirm what the most pressing issue was, the attic insulation. He also looked at other points in the house by my request in order to plan for potential future jobs. His crew came shortly after, and were very respectful to adhere to COVID protocols. Our upstairs is now much warmer! We are happy with the services rendered."
While a normal moisture level for drywall is between 5% and 12%, replacement is recommended if you get consistent readings above 17%. At this level, the drywall is likely too compromised by extensive moisture damage to be considered safe. You can replace either the entire sheet or just the affected section. If you are unsure after a visual inspection, it is best to have a contractor or water restoration provider use a professional moisture meter to get an accurate reading.
Walls should be as smooth as possible before applying peel-and-stick wallpaper. Although you technically can apply wallpaper on textured walls, the peel-and-stick variety won’t last long without a clean, smooth surface for the adhesive to stick to. If you have textured walls, consult a pro about removing the textured finish before moving forward with wallpaper.
You can drywall an unheated garage because the material handles cold temperatures perfectly well. There are no risks or downsides to installing drywall in a garage that is not heated, and the material stands up to moisture and other elements quite well. Drywall will protect your unheated garage's electric wires and cables and add fire protection. However, for effective bonding, you should install drywall at a temperature of 55 degrees Fahrenheit or higher.
The cost to install drywall is between $1.50 and $3 per square foot, while shiplap installation costs between $2 and $7 on average. In most applications, shiplap installations cost more than that of putting in drywall. However, several ways exist to reduce shiplap prices, especially for small locations or accent walls, which can keep the total cost of shiplap competitive with that of drywall.
Although they have similar applications, spackle and joint compound are not the same. Their primary differences lie in their composition, consistency, and ideal use cases.
Spackle is composed of gypsum and binding agents, making it thicker than joint compound. It dries quickly and is easy to sand, which makes it ideal for small wall repair projects like filling nail holes or patching minor damage.
Joint compound, also known as drywall mud, consists of limestone and gypsum. It is primarily used for large-scale projects, such as taping and finishing the seams on newly installed drywall. It tends to shrink more than spackle and can be more difficult to spread.
While both products can be used to fill small depressions and cracks, spackle cannot replace joint compound for taping and mudding new drywall. Conversely, you can often use joint compound for small patching jobs typically done with spackle.
The Jefferson, NY homeowners’ guide to drywall insulation services
From average costs to expert advice, get all the answers you need to get your job done.
How much does it cost to insulate a garage? Discover insulation options, prices, and expected and unexpected circumstances that affect the project cost.
New insulation can make your home more comfortable and boost energy efficiency. Use this insulation cost guide to get an accurate estimate for the installation.
Thick gaps and extra joint compound can alter the look of drywall. So, should drywall be butt up against a wall? Review this guide for seamless installation.
When you’re building a new home, it’s a good idea to get multiple inspections. Learn about the benefits of a pre-drywall inspection during construction.
