Get matched with top door pros in Hamlin, NY

You can often fit a new door slab into an old frame as long as the frame’s in decent shape. The frame needs to be solid, square, and free of warping or rot. The new door has to match the old one in width, height, and thickness, and the hinge and knob placements need to line up or be adjusted carefully. However, if your frame is damaged, swapping just the door won’t cut it. In that case, replacing the entire unit would be the best move for a smooth, secure installation.

Longer screws can make a door more secure, but this isn’t a foolproof method for security. Replacing the short screws in your door’s strike plate with screws that are 3 inches long will make it much more difficult for an intruder to force entry by kicking down the door, but it won’t do anything to stop them from picking the lock. 

Most bedroom doors are 30, 32, or 36 inches wide and about 80 inches tall, depending on the size of the room, the height of the ceiling, and any special accommodations that may be necessary for the bedroom’s occupant. The size of your bedroom door may be larger than average if it leads into a very large bedroom or a home with unique wall or ceiling features.

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.