Top-rated fence painters.

Get matched with top fence painters in Socorro, NM

Enter your zip and get matched with up to 5 pros

Need a pro for your fence painting project in Socorro, NM?

Select your specific project to find the pro for you.

Find Fence painters in Socorro

No results for Fence painter in

Try adjusting your search criteria.
Fence Painting questions, answered by experts

You shouldn't paint a metal fence. Painting doesn't necessarily damage a corrugated metal fence, but these types of fences are meant to flex, and paint can easily chip and break off. Latex paints can address this issue, but those tend not to be very weather-resistant. Certain paints can trap moisture in the corrugation, which can rust the metal and lead to corrosion. And finally, if you paint a copper fence, it won't patina, which is one of the main reasons people buy copper.  

If it rains after you paint your fence, you may need to apply another coat of paint after the fence thoroughly dries. This will ensure a good seal if the rain weakened any areas of the paint. However, if your paint had enough time to dry thoroughly before it rained, you should have no problem.

Yes, you can paint galvanized chain link, but the process is a bit more difficult as it requires additional prep work. Before applying the primer and paint, you must remove the original coating from the metal, which can be time-consuming. If the original coating is not removed, the primer and paint will not bond properly and cause peeling over time.

If you want to achieve a deeper, darker stain color, wait 5 to 10 minutes before wiping it off. However, wipe it off faster for a lighter tone. When wiping off the stain during this part of the process, be sure to work in the direction of the wood’s grain for best results.

The process of painting or staining a fence typically takes between one and five days. The total duration depends on factors like the size of the fence, weather conditions, and necessary drying times. A significant portion of this time is for drying, as stain won't properly absorb into wet wood. You should wait 24 hours to stain a fence after washing it and allow 12 to 24 hours of drying time between each coat. The active work time is generally about one hour for every 10 to 20 linear feet of fencing.

The Socorro, NM homeowners’ guide to fence painting services

From average costs to expert advice, get all the answers you need to get your job done.