Get matched with top garbage collectors in Raton, NM

In some cases, it’s more cost-effective in the long run to replace a garbage disposal, but it depends on the specific issue you’re having and the age of your disposal. You should ask a garbage disposal repair tech for a quote to repair your appliance and then see if it would be more worthwhile to replace it. Additionally, garbage disposals last for around 15 years, so if you know your appliance is reaching that age, it’s likely better to pay for a new garbage disposal rather than sink money into repairs.

Once you have your garbage disposal disconnected, you can remove the mounting bracket by unscrewing the bolts that are holding the bracket. You can back them out just enough to pop off the snap ring, which prevents the bottom portion of the bracket from disconnecting from the top when you unscrew the bolts. Use a regular screwdriver to pop off the snap ring, and the rest of the components should fall off by themselves.

There are many maintenance and repair issues that lead to a malfunctioning garbage disposal. Regular clogs place wear and tear on the motors, leading to an eventual shutdown. Electrical issues at the breaker, wall outlet, or disposal itself can fry the unit. The most common cause is simply a worn-down motor. These motors can only handle so much use before powering down for good. 

If your garbage disposal powers up and you can hear it hum, but the arms inside aren’t moving, the problem might be a stubborn clog, a build-up of grease, or a jam of the impeller plate. To troubleshoot these, ensure your unit is off and disconnected from its power source before checking inside the drain or attempting to manually rotate the impeller arms or plate from the underside of the unit. A hex wrench can help.