Best toilet pros near Radium Springs, NM

Yes, you’ll need to replace your toilet’s wax seal any time you move the toilet. This is because movement of the toilet will break the seal, rendering the remaining wax useless. Thankfully, replacing a wax seal is fairly easy, and the seal itself only costs $2 to $10 at most home improvement stores.

When replacing a wax seal you typically also have to replace the closet bolts that secure the toilet to the flange. These are usually about 2.5" - 3" long and have to be cut once the toilet is secure. Cutting them usually makes them too short to reuse.

Basement toilets don’t always need a pump. However, it is the most common setup because plumbing systems use gravity to move waste away from the home. Basement toilets often sit below the home’s main sewage system, and installing a sewage ejector pump pushes the wastewater and sewage up to the main sewer line. Alternatively, you can use an upflush or macerator toilet that breaks down the waste and pushes it straight to the main sewer line rather than via a sewer line from the bathroom.

Start by gutting the old fixtures and features that need to be removed, such as the tile, vanity, and flooring. You may benefit by removing the toilet, even if you intend to use the same one. Next, install the new shower or tub, followed by the flooring, and then the drywall, which you should then paint. After that, install your new cabinets, vanity, countertop, sink, and faucet, in that order. Replace your light fixture next. Lastly, reconnect the toilet.

If you decide to replace the toilet flapper yourself, the only cost will be buying the new flapper for around $5 to $17. You can also hire a plumber or handyperson to take on the job instead, in which case you’ll pay an hourly rate for labor plus the cost of parts. Handypersons charge $50 to $150 per hour, while plumbers cost $45 to $200 per hour. This repair might take less than an hour for your pro, but note that many providers have a minimum rate for a house call.