Top-rated metal fabricators and restorers.

Get matched with top metal fabricators and restorers in Pojoaque, NM

Q: Can you use a saw to cut metal pipe?

• <div><p>Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.</p></div>

Q: What materials are used for metal stairs?

• <div><p>Steel, aluminum, and wrought iron are common materials. Choose based on durability, style, and budget.</p></div>

Q: What's the difference between sheet metal fabrication and sheet metal stamping?

• <div><p>Also called metal pressing, metal stamping involves placing a metal sheet into a stamping press to create a desired shape using custom tooling. Ideal for mass production, stamping creates coining, embossing, and flanging effects when shaping metal. Meanwhile, sheet metal fabrication is a more cost-effective option ideal for one-off or low-volume projects because it doesn't require custom tooling.</p></div>

Q: Do welders need to be licensed or certified?

• <div><p>Some states require welders to be licensed and certified, while others don&rsquo;t. However, it&rsquo;s always a good idea to hire a licensed welder, regardless of requirements in your area, especially if you need welding for structural components of your home or gas lines. Licensed welders have gone through training and testing to prove their skills, so they&rsquo;re less likely to make a mistake that could be detrimental to your home. Use Angi&rsquo;s <a href="https://www.angi.com/angi-license-check.htm">state licensing tool</a> to determine whether your potential hire has a welding license.</p></div>

Q: What is corrugated metal?

• <div><p>Corrugated metal has been pressed so that it has alternating ridges or grooves. Metal that has undergone this process becomes incredibly strong, with some of the highest strength-to-weight ratios of any material. It's lightweight and has an increased surface area when compared to a flat sheet of metal. Both of these attributes contribute to its coveted strength. It's used for fencing because it's weather- and impact-resistant, rarely needs maintenance, and lasts many years&mdash;for a relatively low cost. </p></div>

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Pojoaque, NM?

Select your specific project to find the pro for you.

Verified Reviews for Metal Fabrication And Restoration pros in Pojoaque, NM

*The Angi rating for Metal Fabrication And Restoration companies in Pojoaque, NM is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

*The HomeAdvisor rating for Metal Fabrication And Restoration companies in Pojoaque, NM is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

Last update on November 24, 2025

Reviewed in November 2025
Leon is a Craftsman who makes nice things. He and I have worked together in a variety of manufacturing/fabrication settings, and I have found him to be creative and skilled, with an easy adaptability to each task. I would recommend him in any endeavor.
Handy Custom
Request a quote
Reviewed in December 2020
Rocky Mountain Roofing did a superb job replacing my shingle roof with metal. They were informative, timely, and responsive. I can't recommend them highly enough.
Rocky Mountain Roofing Services LLC
Request a quote
Reviewed in January 2020
After almost 3 weeks of being told I’d get a quote I finally spoke with jolene. She promised that by the end of the day I would have it. The only thing I got by the end of the day was an email saying that they couldn’t take on my project at this time because it was to complicated. My project was...
Green Mountain Contractors Inc
Request a quote
Reviewed in July 2017
didn't want to drill through the metal, they made it happen! Panels look great onPerfect! Paul and Thomas make a dynamic team. Going from an asphalt shingle roof to a metal roof is not an easy task. They were very thorough! They explained every thing they were doing, as they went along! Careful...
EarthStar Energy Consultants, LLC
Request a quote
Reviewed in July 2016
Other locksmiths were unwilling to do any work on a metal door frame, but this locksmith had the deadbolt sliding into the door frame in a matter of minutes. The second lock was missing a pin, and again the problem was fixed in no time. I have never seen anyone work so quickly and effortlessly...
The Lock Shop
Request a quote
Reviewed in December 2014
The bottom line for me is that Christine is an excellent upholstery business who gave my lovely second hand sofa a much needed couch cushion update as the old cushions that came with it had lived a good life yet needed to be replaced with new ones in a fabric that was pet friendly. I received...
Christine Reisch Interiors
Request a quote
Reviewed in November 2014
Delivery trucks had been stolen, so the two men sent to deliver and set up had to put it on the top of a personal truck and wiggle it off onto a dolly. Scary. Once in, they were awesome explaining everything and getting it ready to use the same night. I did have trouble with well water and...
Dreamstyle Remodeling
Request a quote
Reviewed in September 2013
Only complication was the power went out to our neighborhood prior to the job. But the job was done well and when the power was restored to the area, everything worked fine.
Libo Electric Inc
Request a quote
Reviewed in June 2013
Brad was fantastic! He came early, pinpointed the problem right away and fixed it on the spot. It took about 10 minutes and cost around $100. He's honest and professional, and his rates are extremely reasonable. I had called Just Sprinklers first and was told I had to replace the entire valve...
By The Yard Landscaping & Irrigation
Request a quote
Reviewed in February 2013
Ray's mechanical was professional and affordable. Ray helped on an emergency basis when the former contractor messed up the job. Ray came in and fixed the problem and also inspected the rest of the plumbing to ensure no mistakes were made and caught a potential problem.
Pat's Mechanical
Request a quote

Find Metal fabricators and restorers in Pojoaque

MayDay Solutions LLC

5.00(

)

•Approved Pro

MayDay Solutions LLC

Customers say: Quick response

96 local quotes requested

1 years of experience

Thank you for your interest in MayDay Solutions! My name is Jason May, I was born and raised in Albuquerque. I studied and received my certifications in Welding in 2012 in Southern California where I met my now wife. We moved our growing family back to Albuquerque in 2021 to be closer to family. I have Welding experience since 2014 and specialize in custom gates, fabrication, handrails, gate & fence repair, and anything in between. Do you have a project that needs metal work? Send us an inquiry today. We are happy to answer any questions and help guide you to a successful project.

"What a pleasure to work with MayDay Solutions. They were easy to work with, did what they said they'd do, kept us informed of any changes or delays, and spent the necessary time to get the project done right. We couldn't be more pleased with the finished project. We highly recommend Jason, Chanel and MayDay Solutions."

Jody K on November 2025

"What a pleasure to work with MayDay Solutions. They were easy to work with, did what they said they'd do, kept us informed of any changes or delays, and spent the necessary time to get the project done right. We couldn't be more pleased with the finished project. We highly recommend Jason, Chanel and MayDay Solutions."

Jody K on November 2025

Get matched with top metal fabricators and restorers in Pojoaque, NM

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Pojoaque, NM?

Handyman for Multiple Small Project Service

Metal Stairs and Railings Installation and Replacement

Carpentry Framing Repair

Verified Reviews for Metal Fabrication And Restoration pros in Pojoaque, NM

Find Metal fabricators and restorers in Pojoaque

MayDay Solutions LLC

MayDay Solutions LLC

Alco

Alco

Parras contracting

Parras contracting

TJH Design + Build

TJH Design + Build

Open Range Ironworks, LLC

Open Range Ironworks, LLC

ArtPrep LLC

ArtPrep LLC

On-The-Fly Mobile welding & Repair

On-The-Fly Mobile welding & Repair

J.P Welding LLC

J.P Welding LLC

Tom Richs Fabrication

Tom Richs Fabrication

365 Construction LLC

365 Construction LLC

The Pojoaque, NM homeowners’ guide to metal fabrication and restoration services

How Much Does Sheet Metal Fabrication Cost? [2025 Data]

How Much Does a Wrought Iron Railing Cost? [2025 Data]

6 Metal Stairs Questions to Answer Before Installation

Find Metal fabrication and restoration Pros in other cities near youNot finding what you are looking for in Pojoaque? Check surrounding areas for Metal fabricators and restorers.

Which Metal fabrication and restoration task are you tackling?Find Pojoaque Metal fabrication and restoration services on Angi who specialize in any of these tasks