Get matched with top siding pros in Paraje, NM

Wood siding requires an air gap behind it to allow water to drain out, and for air circulation and venting to allow humid air to escape and keep the material from rotting due to moisture. 

The recommended PSI (pounds per square inch) for cleaning vinyl siding can vary, so it's best to consult the manufacturer's guidelines. Generally, vinyl siding can handle high pressure, from 2,500 to 3,500 PSI. For comparison, more delicate materials like wood and aluminum siding should not face more than 1,500 PSI. To safely disperse the pressure on vinyl, use a tip with a wider spray span, such as a green (25-degree) or yellow (15-degree) nozzle. For routine cleaning of light dirt, a garden hose with a spray nozzle may be sufficient. Always exercise caution to avoid using excessive pressure that could damage the siding.

Vinyl siding is the cheapest option in terms of upfront costs. The average cost to install vinyl siding is around $12,173, with certain types like vinyl shake, clapboard, or dutch lap costing as little as $2 to $3 per square foot. While vinyl is very low-cost, it may not last as long as natural materials or metal, with a typical lifespan of 20 to 40 years. In contrast, metal siding is more expensive initially but can save you money in the long run due to its longer lifespan, which is often double that of vinyl. It's recommended to consult a siding professional to determine if the lowest-cost option is the best material for your specific home.

To calculate how much siding you need for exterior walls, first measure the height and width of the rectangular walls. For the triangular gable walls, measure the width and then the height from the ground to the tallest gable point.

• For the rectangular walls, the calculation is: length x height

• For the triangular gable walls, the calculation is: (length x height) / 2

Once you add these up, include an additional 10% to account for any wastage.