Get matched with top bathtub restoration pros in Melrose, NM

Before you begin caulking a shower, you’ll need to use a utility knife or solvent to remove the old caulk and inspect the area for mold. If needed, take appropriate steps to get rid of the mold, then wipe everything down with dish soap and warm water before letting it dry completely. Finally, surround the caulking area with two strips of blue painter’s tape—one above the joint where you’re caulking and another below it.

Epoxy helps protect your garage floor from moisture, staining, and cracks over time. Concrete itself is typically porous, and epoxy fills those tiny holes and creates a smooth finish. Installing garage floor epoxy may also extend the life span of your garage to upwards of 20 years, as it strengthens the concrete and helps prevent water from seeping through it.

Refinishing or installing a tub liner comes down to your personal preference, budget, and timeline. It costs $480 to refinish a tub, and it takes about six hours. In comparison, installing a liner costs between $800 and $1,000 and takes about a day or less, including plumbing fixtures.

Surprisingly, cleaning an air bath is almost as easy as relaxing in one. Most air baths have a self-cleaning or drying cycle to remove moisture from the inner tubing. This prevents mold and keeps the tub ready for your next soaking session. For deeper cleaning, use mild soap and a soft cloth to wipe the surfaces and periodically clean the air jets as the manufacturer recommends.