Top-rated masons.

Best masons near Holloman Air Force Base, NM

Enter your zip and get matched with up to 5 pros

Need a pro for your masonry work project in Holloman Air Force Base, NM?

Select your specific project to find the pro for you.

Top-Rated Masons in Holloman Air Force Base - Updated Nov 2026

Avatar for Cinco Mosqueteros Rockwall and Landscaping
Cinco Mosqueteros Rockwall and Landscaping
5.0(
30
)
Brick and Stone Flatwork - RepairBrick and Stone Patios, Walks, and Steps - InstallBrick, Stone or Block Wall - Install+2 more

Serving Holloman Air Force Base, NM and surrounding areas

In business since 2024

Free estimates

Emergency services offered

"My cinderblock wall was built in the 1960's. The mortar between the brick joints had loosened and a tree root pressing against the brick below grade caused the wall to crack from top to bottom between my yard and the neighbors yard. Cinco Mosqueteros did a great job repairing the wall, leaving it in much better shape than when it was originally built. Many thanks!"
Starting installation
Lawn maintenance
Fix pipes
Landscaping
Finished project

+42

Recommended by93%of homeowners
Avatar for Reule Sun Corp
Reule Sun Corp
4.4(
67
)
Brick or Stone - Tuck-pointingBrick or Stone - Tuckpointing - For BusinessBrick or Stone Siding: Install or Completely Replace+3 more

Serving Holloman Air Force Base, NM and surrounding areas

In business since 1982

Free estimates

Credit card accepted

"Ruele did a terrific job replacing the stucco on our home and our casita. Their crew is great - very professional, competent, friendly and considerate. I really appreciated the thorough and careful way they approached their work and their attention to detail. I would highly recommend Ruele."
Recommended by90%of homeowners
Avatar for Bedrock Construction, Inc.
Bedrock Construction, Inc.
4.4(
7
)
Concrete Foundation - InstallRetaining Wall - Install

Serving Holloman Air Force Base, NM and surrounding areas

In business since 2008

Free estimates

Offers commercial services

"Joram Melendez and his co-worker (his brother) repaired my driveway which was a challenge to negotiate, especially on my Harley-Davidson. There was a precipitous drop at the end of my driveway which my bike--and even my car--would bottom out on. Bedrock Construction did the job on time, on budget, and finished it beautifully. I am more than pleased with the result. I would recommend them to anyone."
Response time2 days
Recommended by83%of homeowners
SMRT Construction Services Inc.
3.3(
88
)
Brick or Stone - Tuck-pointingBrick or Stone - Tuckpointing - For BusinessBrick or Stone Siding: Install or Completely Replace+4 more

Serving Holloman Air Force Base, NM and surrounding areas

In business since 1984

Free estimates

Emergency services offered

"the job was completed by 2 men but the fence & gate are not lined up straight; more of a zigzag & gate did not close properly so I had to have someone else redo the gate closure. They did not use a plumb line; just eyeballed it... Luckily it's in my backyard so not many people see it. At least they got the job done quickly right after I moved into my new home & needed a safe place to keep our dogs.
"
Recommended by58%of homeowners
Showing 1-10 of 24
Masonry FAQs, answered by experts

You should use cement for a chimney crown. The purpose of the chimney crown is to protect the mortar below from water damage and the effects of weather. For this reason, chimney crowns should only be made using cement. When repairing a crown, use caulks and sealants designed for cement repair rather than mortar repair.

Yes, you can enlarge windows in a brick house. Your masonry contractor will need to cut away exterior brick to make space for the larger window, and you may also need to consult a structural engineer to make sure the window is properly supported inside the frame of the house.

Use fire bricks for a brick pizza oven. These bricks are typically used for fireplaces and chimneys as they can withstand high temperatures from heat sources. If you attempt to use any other kind of bricks, it’s likely that this material will crack from such high heat exposure in the best case—and potentially explode and cause serious harm in the worst case.

You may not need a hammer drill if you’re planning on drilling one or two very small diameter holes in brick. For holes with a diameter of 3/16-inch or less, a regular drill with a masonry bit can do the job. However, the bit will heat up quickly, and the process will take significantly longer than with a hammer drill. Prepare to cool your drill bit down in a bucket of water more often.

Clean regularly, check for cracks, and inspect the chimney annually for safety.

The Holloman Air Force Base, NM homeowners’ guide to masonry services

From average costs to expert advice, get all the answers you need to get your job done.