"I spoke with Dave on the phone, and he sent Shawn out to inspect. Both were courteous and professional. Shawn listened carefully to my description of the problem odor and when it happened. He checked walls for moisture and other indications of possible mold. Although he did not think there was mold based on his examination, I opted for air samples to make sure. The initial evaluation was free - cost was for the air samples and analysis. Analysis of the samples in the lab showed that there was not a mold problem. Shawn helped me troubleshoot for other possible sources of the problem."
"Kleanforce Environmental comes highly recommended. They promptly return calls and arrive at the scheduled time and place as promised. They are extremely efficient, knowledgeable and professional. A bathroom water leak, 7 years ago, in a bathroom exterior wall created the unknown mold issue in the adjacent interior wall. The interior of the exterior wall was opened up by the builder of my home. The insulation was removed, water leak was repaired, wall cavity dried, re-insulated and the wall was repaired. In September 2020, I began a remodel of the same bathroom and discovered mold in the adjacent interior wall. After receiving two quotes, one firm in Albuquerque for $6.2K and one in Las Cruces for $600.00 I knew that something wasn't right. I searched Home Advisor and found Gary. My initial contact and conversation was a fabulous experience. The quote for mold remediation was very fair. The pre & post tests of the air quality and mold spore count on effected surfaces was included in the remediation task. Gary and his team did a fabulous job of cleaning up post the mold remediation. The team understood my concerns, made me feel at ease and I felt like a truly valued client."
"When I was looking for a mold inspector in Santa Fe, Eric Tillson was by far the most professional of any I spoke to. By professional I mean he spent a great deal of time talking with me without trying to sell himself. I was interested in a particular mold test called an ERMI test and though it was not one he used himself, he took the time to research it and explained in depth how his method of testing could be combined with the ERMI to give me the information I needed. Do not be fooled by the fact that his company is new -- he has been in the business for a very long time and is extremely knowledgeable. Last but not least, Eric is a very kind man. I was extremely anxious about the mold in a house I rented and he could not have been more understanding and compassionate. Incidentally, he also does thorough cleaning of homes after (or before) remediation. I will definitely be hiring him to do that for me in the near future."
\n\nTotal Renew LLC\n\nAt Total Renew LLC, we are dedicated to bringing new life to your home and property through quality restoration and renovation services. Whether you’re looking to install new flooring, restore a damaged property, or complete interior exterior pain our team is committed to delivering exceptional craftsmanship and reliable service every step of the way.\n\nWe take pride in transforming spaces with attention to detail, honesty, and professionalism. Our goal is simple: to help homeowners turn their vision into reality while providing quality work they can trust.\n\n✅ Home Restoration \n✅ Mold Remediation \n✅ Flooring Installation\n✅ Water Mitigation \n✅ Interior & Exterior painting \n\nThank you for supporting our local business.
"The provider had a lot of important info regarding what to look for when buying furniture & how to clean. Everything turned out clean & beautiful. I will definitely use them again. "
"They are very friendly and professional I have no worries leaving them in my house alone. They watched to make sure my pets did not leave the house and we're very very nice I recommend them highly."
"AHS is ok. They cover repairs of most everything under the roof of your house. The companies that contract with them are not always the best. You call AHS with the issue, they send a fax to the repair company and give you the contact info. If they don't contact you within 24 hours, you call them. Sometimes they answer, sometimes they don't. When they arrive (usually three days or so later), they service the item. if it has issues within the 90 days, you call AHS again, they are sent out with no charge. If the serviceman decides the unit is unrepairable, AHS will allow you to choose a replacement from their listing (usually not as good as what you have) they will install and remove your old item, or give you wholesale amount to buy and install your own. Prices vary on what you want covered and what you want the copay to be, plus where you live. For me it is 49.99 per month with a 75.00 time of service order. You can have more than one item serviced at the same time under the same fee. If you have a SEAR product the repair guys are great. Not that wild about the other ones they send out. But it is a big savings compared to calling someone on your own. The cost of service is only the 75.00 copay."
Looking for reliable Fire, Smoke, or Water restoration services in the Albuquerque area? Look no further than RapidResto NM LLC. Our team of experts is here to assist you with all your restoration needs. With our exceptional service and attention to detail, we are dedicated to providing the best solutions for all your needs. Contact us today!\n
Mold Testing and Remediation FAQs, answered by experts
The best way to measure moisture levels in drywall is with a moisture meter. Moisture meters feature small probes that you insert into drywall (similar to pushing a pin into the wall). Ideally, you'll take moisture readings at several locations on the wall to get a general idea of the moisture level.
Most mushrooms found on residential lawns are harmless. Certain varieties such as destroying angel, fly agaric, and vomiter mushrooms that can grow in grass will occasionally make their way onto residential lawn, but this is uncommon. Since mushrooms can be notoriously difficult to identify, if you suspect that your lawn mushrooms could be a poisonous type, consulting a professional is recommended.
The gasket and drum of a washing machine are ideal spots for mold to grow. They are dark, warm, and humid, conditions that mold thrives in. The products you use to wash your clothing, such as fabric softener and detergent, can also encourage growth by giving the mold a food source.
DIY kits are available for basic air quality testing, but professional services provide more comprehensive results and recommendations. While a DIY kit may seem cost-effective, a professional assessment is more thorough. Inspectors are better equipped to catch all pollutants and hazards, and you'll still need a professional to verify and act on DIY test results. Furthermore, some kits don't test for certain pollutants or only detect their presence without measuring specific levels (like mold spores). It's generally better to opt for a detailed professional assessment.
It is safe to remove old linoleum, but it may require the help of a specialist due to the risk of asbestos in the material. Before you cut into linoleum or try to peel it up, have it tested for asbestos. If it tests positive, professionals will need to remove it to prevent the risk of health issues from airborne toxic particles. If it’s asbestos-free, DIY removal is possible and safe.
The Dulce, NM homeowners’ guide to mold testing and remediation services
From average costs to expert advice, get all the answers you need to get your job done.
The cost of a mold inspection might seem high, but it’s one of the best investments you can make for your health and home. Read on to learn cost-saving tips.
Figuring out how to test for mold in your home is important. Mold testing can offer peace of mind and lets you know if it’s time to call a pro. Learn about mold testing processes in this guide.
When is mold remediation required at your home? We can help you decide whether the musty odor or the patch of mold you’re experiencing requires a pro’s help.
There's an excellent reason why you should avoid going with the same company for mold testing and mold remediation. Learn why different companies should handle these tasks.