Get matched with top bathtub restoration pros in Crownpoint, NM

Typically, you should wait two to three days to use your bathtub after it has been reglazed. This allows the epoxy resin to cure properly. However, the exact waiting time can vary depending on the materials used. Some quick-dry epoxy kits may cure in as little as 12 hours, while others might have a four-hour cure time, potentially allowing for same-day use. To ensure the epoxy dries correctly, ventilate the bathroom well during the curing period. Always check the manufacturer’s instructions and consult with your reglazing professional for specific guidance on when it's safe to use the tub.

You're more likely to accidentally crack your plastic tub rather than successfully fixing a hole. You can fix hairline cracks and larger stress cracks with a plastic tub crack repair kit from a home improvement store. You'll need to clean out the tub, apply either the epoxy resin or filler putty compound into the crack, let it dry, and then sand it out.

Depending on your budget, you might consider a new tub as part of your bathroom remodel costs. It could be a good opportunity to update everything after considering all of the bathroom remodel ideas out there.

Refinished bathtubs typically need to be refinished every five years or so. Frequent cleaning and use will break down the finish and make cracks and chips appear more readily. Cracks and chips tend to grow once they begin unless they are repaired immediately. Ideally, you should refinish your bathtub before it gets old enough that refinishing isn’t worth the hassle.

Yes, you can use a dremel tool to cut plexiglass. Follow the instructions under “How to Cut Plexiglass with a Saw,” and use a dremel tool with a 561 bit instead of a saw.