Best concrete resurfacing pros near Columbus, NM

If your concrete steps have crumbled or chipped, you can fix them by removing any chips or flakes, cleaning and wetting the affected area, applying a concrete bonding agent, and finally applying new concrete, usually in the form of Portland cement. For widespread damage, you can consider concrete resurfacing instead. For fixing concrete spalling that has led to deep damage, you might need to remove damaged material, add structural supports, and pour new concrete into a mold.

Common issues include cracks, settling, and loose stones. Regular maintenance prevents significant damage.

Pros often use mudjacking or polyurethane foam injection to level a sunken concrete patio. Both methods lift the slab by filling voids beneath it. After properly compacting the soil beneath it to prevent future settling, the concrete may need to be removed and re-poured for severe sinking.

Concrete resurfacing and concrete overlay are terms often used interchangeably to describe the process of applying a new, thin layer of pre-blended concrete over an existing slab. This process enhances the durability and appearance of the concrete, giving it a fresh look without the high cost of a full replacement. The new layer is typically between 1/4-inch and 1-inch thick, significantly less than the 4 inches required for a new slab, and can be stamped, colored, or textured for a custom finish.

While the terms are often considered the same, their meaning can sometimes vary by contractor. Some may use "overlay" to describe a thicker application that adds structural integrity, while "resurfacing" might refer to a thinner layer intended for cosmetic upgrades. Other common names for this process include concrete restoration, concrete refinishing, and concrete rejuvenation.