Get matched with top countertop and backsplash pros in Black Rock, NM

Yes, a 12-inch countertop overhang will need support to keep it stable. The exact type of support depends on your countertop thickness and material. Thicker, heavier countertops need extra support, like a corbel or a post, to keep them from sagging or toppling over.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

A minimum overhang of 10 to 12 inches is generally recommended for countertop or island seating to provide enough legroom. For increased comfort, an overhang of 15 to 18 inches is ideal, allowing for more space and a relaxed experience. However, a 10-inch overhang can be sufficient in certain situations, such as for bar-height countertops, when using small stools, or in smaller kitchens where space is limited. Taller countertops may also require less overhang than shorter ones. Ultimately, you should consider your specific needs for legroom and measure to ensure the overhang fits comfortably within your kitchen's layout.

The timeline to install countertops largely depends on the materials and the job size. Installing granite countertops takes anywhere from two to seven hours, though complex designs can pass the eight hour mark. Average-sized quartz countertops take two to five hours to install, though most pros will recommend a 24-hour settling period. Marble, on the other hand, is finicky and can take up to two whole days to install. No matter how you slice it, however, a professional is going to complete the job much quicker than an amateur.