Get matched with top dryer vent cleaners in Alamogordo, NM

Professionals use specialized tools to clean dryer vents effectively. These tools typically include a combination of flexible rods and brushes designed to navigate the vent's twists and turns. The brushes dislodge and loosen lint and debris, while the rods help extend the reach through the vent. High-powered vacuums with HEPA filters are also used to capture and remove the dislodged lint and particles, ensuring a thorough cleaning. In some cases, professionals may employ video inspection cameras to assess the condition of the vent and confirm that it's entirely clean.

While a professional can always help, there are some common plumbing culprits you can check yourself to see if you can find the sewer gas smell. For example, you should check your water traps, sometimes called P-traps and S-traps, which are located under sink, shower, and laundry drains. The wax ring beneath the base of your toilet, which creates a watertight seal with the plumbing, could also have gone bad.

There are several common warning signs that indicate your dryer vent may be clogged. If your clothes are taking longer than usual to dry, the vent could be the culprit. Other signs include the exterior of the dryer becoming very hot during operation, or the dryer shutting itself off due to overheating. You might also notice an excess of lint left inside the dryer or in the lint trap after a cycle, see lint building up around the exterior vent opening, or detect unusual or burning odors. A clogged dryer vent is a serious fire hazard, so if you notice any of these signs, you should stop using the dryer and have the vent cleaned immediately.

Yes, you can snake a roof vent. This is one of the best ways to clear a problematic clog in a plumbing vent. You can either snake the vent by climbing on the roof and sending the plumber’s snake or auger directly down the vent opening, or you can cut a hole in the vent from inside the attic and snake it from there.