Are hot water heaters good for scrap metal?

• <div><p>Since water heaters are primarily made of metal, they’re commonly accepted by scrap yards and collectors. Don’t expect to fetch a high price, though—water heaters are mostly steel and aluminum, which aren’t high-value metals. Some components are made of more valuable metals, like brass and copper, but they’re a small portion of the heater and won’t affect the price much.</p></div>

Top-rated metal fabricators and restorers.

Get matched with top metal fabricators and restorers in Tinton Falls, NJ

Q: Can I do my own welding?

• <div><p>You should not do your own welding unless you have the proper training and experience. Most home electrical systems can only handle MIG welding, which creates weaker bonds than TIG welding and won&rsquo;t work on certain metals or metal thicknesses. Both welding forms usually require the use of shielding gas, which can be dangerous to store at home. Additionally, welding machines create temperatures of over 3,000 degrees, and the sparks can blind you if you don&rsquo;t have the proper equipment. As such, it&rsquo;s usually better to <a href="https://www.angi.com/articles/4-things-consider-when-hiring-welder.htm">hire a professional welder</a> for your welding projects.</p></div>

Q: How do material choice and design influence the cost of installing metal stairs and railings?

• <div><p>Costs depend on material type, design complexity, and additional features like handrails or lighting.</p></div>

Q: How do you make stainless steel shine?

• <div><p>To restore an appliance&rsquo;s shine, clean the surfaces using a natural cleaning solution, and then use a mineral oil or olive oil and a soft microfiber rag to polish stainless steel surfaces in the direction of the graining. A little goes a long way, so dip the cloth in a small amount of oil. If you have any excess, continue with a dry part of the microfiber cloth to soak up any remnants.</p></div>

Q: Are hot water heaters good for scrap metal?

• <div><p>Since water heaters are primarily made of metal, they&rsquo;re commonly accepted by scrap yards and collectors. Don&rsquo;t expect to fetch a high price, though&mdash;water heaters are mostly steel and aluminum, which aren&rsquo;t high-value metals. Some components are made of more valuable metals, like brass and copper, but they&rsquo;re a small portion of the heater and won&rsquo;t affect the price much.</p></div>

Q: What is the best material to frame an outdoor kitchen?

• <div><p>A few materials are most commonly used when it comes to building a frame for an outdoor kitchen: wood, steel, and concrete or brick. While there&rsquo;s no best option overall, each material is better suited to different needs. Concrete and brick are typically more customizable than other options, but aren&rsquo;t as resistant to inclement weather as steel. Wood is the most affordable pick, but it is more susceptible to rot, mildew, and heat than the others.</p></div>

There are 2 highly-rated local metal fabricators and restorers.

Need a pro for your metal fabrication and restoration project in Tinton Falls, NJ?

Select your specific project to find the pro for you.

Verified Reviews for Metal Fabrication And Restoration pros in Tinton Falls, NJ

*The Angi rating for Metal Fabrication And Restoration companies in Tinton Falls, NJ is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

*The HomeAdvisor rating for Metal Fabrication And Restoration companies in Tinton Falls, NJ is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

Last update on October 04, 2025

Reviewed in September 2025
Absolutely love the work. Lewis and his crew are gentlemen and efficient. Lewis is very knowledgeable and not pushy at all. He allows your ideas to come to life. The work was done timely , Lewis always text to inform his arrival and they clean up after every job. I will have him as my official...
LMET CORP.
Request a quote
Reviewed in September 2025
Very good installation of new outdoor iron banister. Also repair of sinking entry gate and driveway gates. Fair priced and would hire again.
LMET CORP.
Request a quote
Reviewed in September 2025
Westchester Welding recently completed an installation and repair job for me, and couldn’t be more impressed. Chris did an outstanding job - professional, efficient, and thorough. On top of that, they offered the best price around, which made the experience even better. Highly recommend them for...
Westchester Welding
Request a quote
Reviewed in August 2025
Very well. He was prompt, his price was reasonable. Did the job with a minimum of problems. For my job he was excellent. J. Eisenberg
Westchester Welding
Request a quote
Reviewed in August 2025
I called Chris to find out if he would be able to fix my Yankee stadium seats that had been hit by a propane truck in driveway. He asked for photos. He felt he could fix them but prepared me that possibly could not sit in seats after they were welded. He arrived at the location soon after my...
Westchester Welding
Request a quote
Reviewed in July 2025
Chris from Westchester welding did a wonderful job, he was courteous and prompt and explained everything he was going to do to repair our patio chairs. He picked up the chairs and The repairs were done quickly and delivered back with no issues. I would highly recommend Chris and Westchester...
Westchester Welding
Request a quote
Reviewed in July 2025
Chris is a good man He really cares about his work and he did a magnificent job putting together a difficult steel Stair Chris’s weld were done like a professional Great job and look forward to working with him Again Thanks Mike B
Westchester Welding
Request a quote
Reviewed in July 2025
Oh, revival of my rusted poolside gate, via Mustang Restorations. They took the armor apart, removed rust, strengthened weak joints, and coated the steel with an anti-rust. Now, it works perfectly and looks better than new! Cost-effective alternative to replacement.
MUSTANG FENCING
Request a quote
Reviewed in May 2025
LMET met our expectations both with the quality and pricing of the job. Will definitely work with them again.
LMET CORP.
Request a quote
Reviewed in April 2025
Chris from Westchester Welding is amazing! Incredibly responsive and on top of every element of the job from start to finish. He also finished the job quickly and with great attention to detail. Overall, I would say he really owned the job well and I would highly recommend him to anyone. ...
Westchester Welding
Request a quote

Find Metal fabricators and restorers in Tinton Falls

Fusion King Welding LLC

Fusion King Welding LLC

Customers say: True professional

1 years of experience

Emergency services offered

You can depend on Fusion King Welding LLC to provide a high quality welding and fabrication service. We specialize in structural steel welding, steel railings, and wrought iron railing fabrication, installation and repairs. We provide excellent customer service. If you are looking for a AWS Certified welder you can trust, please call us at 609-772-7547, or visit us at www.fusionkingwelding.com *Please keep in mind, we charge $150 minimum for all welding services

"David did a great job. He was through and meticulous. If a need arises I would use him again. I plan on recommending him to friends and family."

Robert M on June 2025

"David did a great job. He was through and meticulous. If a need arises I would use him again. I plan on recommending him to friends and family."

Robert M on June 2025

APC Construction LLC

APC Construction LLC

Customers say: Quick response

27 local quotes requested

27 years of experience

Our success comes from our clients’ success, and we understand that ultimately depends on our ability to deliver on our promises. APC Construction’s unwavering commitment to helping our clients meet their goals is built on our confidence to take on any job. The structures and relationships we’ve built across the jobs we’ve done prove our ability and empower our process.

"Our chimney had a leak and we called them to give us a quote, the price was affordable and the work was done quick and no leak. Thank you Sam and the crew. "

Olivia A on May 2025

"Our chimney had a leak and we called them to give us a quote, the price was affordable and the work was done quick and no leak. Thank you Sam and the crew. "

Olivia A on May 2025

Get matched with top metal fabricators and restorers in Tinton Falls, NJ

There are 2 highly-rated local metal fabricators and restorers.

Need a pro for your metal fabrication and restoration project in Tinton Falls, NJ?

Handyman for Multiple Small Project Service

Metal Stairs and Railings Installation and Replacement

Carpentry Framing Repair

Verified Reviews for Metal Fabrication And Restoration pros in Tinton Falls, NJ

Find Metal fabricators and restorers in Tinton Falls

Fusion King Welding LLC

Fusion King Welding LLC

APC Construction LLC

APC Construction LLC

Red Kite Welding

Red Kite Welding

morgan Szotak

morgan Szotak

Joe

Joe

Witts Welding LLC

Witts Welding LLC

Atmax Filtration Elements inc.

Atmax Filtration Elements inc.

city metal fabricators

city metal fabricators

Long Branch Iron Works

Long Branch Iron Works

Brayco Inc.

Brayco Inc.

The Tinton Falls, NJ homeowners’ guide to metal fabrication and restoration services

How Much Does Sheet Metal Fabrication Cost? [2025 Data]

6 Metal Stairs Questions to Answer Before Installation

Find Metal fabrication and restoration Pros in other cities near youNot finding what you are looking for in Tinton Falls? Check surrounding areas for Metal fabricators and restorers.

Find Pros for other jobs in Tinton FallsIf your Metal fabrication and restoration job is complete, use Angi to find quality Pros in Tinton Falls for any number of jobs.