Get matched with top roofers in Lake Como, NJ

Asphalt shingles blister when air gets trapped between building materials, either within the layers of the shingle itself or in adhesives on the undersides of the shingles. As the roof heats up in direct sunlight, the trapped gas expands and creates a bubble in the roof. Eventually, the bubble can pop, leaving an exposed area of decking and underlayment.

EPDM roofs have a few common problems, most of which can be resolved with regular maintenance. This type of roofing is laid down in sheets with seams, which can be a starting point for leaks. Proper installation and roof sealing can often avoid seam issues. 

The material is also susceptible to tears and punctures from falling branches or other sharp objects. There are black and white versions of EPDM, and the black version is more prone to fade and succumb to UV damage. Regular roof inspections can protect the costs of rubber roof installation and extend the life of your roof.

A well-maintained tile roof can last anywhere from 40 to over 100 years, with its exact lifespan depending on the material and level of care. Proper maintenance, which includes keeping the roof clean, free of debris, and performing routine repairs for any cracked tiles, is crucial for longevity. The lifespan varies significantly by tile type:

• Clay, terracotta, and slate tiles are highly durable and can last over 100 years.

• Concrete tiles typically last from 30 to 100 years.

• Metal tile roofs generally last between 40 and 70 years.

• Composite tile roofs have a lifespan of 20 to 50 years.

Be aware that maintenance for a tile roof can sometimes be more expensive than for an asphalt roof.

A roof's ability to handle snow depends on its strength and the snow's weight, as wet snow is much heavier than dry, fluffy snow. While designs in snowy regions often allow for 35 to 50 pounds per square foot, a general guideline is that a typical roof can withstand about four feet of fresh snow, two feet of packed snow, or just one inch of ice. Factors like the roof's age, slope, and support structure also affect its capacity; newer, sloped roofs generally hold more weight than older, flat ones. Ice and ice dams add significant, dangerous weight. Because capacity varies, it is best to contact a professional roofing contractor or the original builder to determine the maximum snow load for your specific home.