Get matched with top bathtub restoration pros in Sutton, NE

Yes, you can use a dremel tool to cut plexiglass. Follow the instructions under “How to Cut Plexiglass with a Saw,” and use a dremel tool with a 561 bit instead of a saw.

Yes, you can absolutely remove rust from a bathtub drain, and doing so can improve the appearance of your tub. Combine three parts baking soda with one part vinegar and mix into a paste. Apply the paste over the drain and let it sit for about an hour before rinsing with cold water. Repeat the process if some rust stains remain. If the stains return, consider installing a water softener, as ongoing issues with bathtub drain rust usually indicate hard water.

Even at the lowest setting, there’s always a risk that pressure washing might damage your shower or tub. Never use this technique if there’s pre-existing damage in your shower or tub, like peeling caulk, sealant, or cracked tiles. And skip this method entirely if there are any wood features present.

Resurfacing a bathtub is less expensive than replacing one. Resurfacing a tub costs about $330 to $630, depending on the material, while replacing a tub costs an average of $4,150. But remember that resurfacing is a temporary solution for a worn-out tub, and you may need to refinish a tub every few years to keep it looking new.