Get matched with top bathtub restoration pros in Deshler, NE

Bathtub refinishing refers to the entire process of resurfacing a bathtub. Reglazing is one step in the bathtub refinishing process. To refinish a bathtub, a refinishing professional will clean the tub, protect the surrounding areas, remove the existing glaze, sand and prepare the surface, apply the new glaze coating, caulk the tub, and replace the fixtures.

If your Corian® countertop begins to appear dull or dirty, or you notice scratches on the surface, you can return it to its original finish while maintaining its look. To do this, repair any scratches with a repair compound and sand the surface after it dries. 

Then, use an orbital sander with either a 100-, 30-, or 15-micron disc and finish with a hand pad (like Scotch-Brite™ 7447 or 7448) or lamb’s wool bonnet and automotive cutting compound for a matte, semi-gloss, or gloss-finish, respectively.

Don’t let the following items sit in your sink, or you’ll end up with a stain:

• Tea bags

• Wet cloths 

• Sponges

• Hair dye

A chipped bathtub could leak over time if you don’t take care of the issue. A tiny chip isn’t a big deal but may eventually grow into a larger crack. As the months go by, the tub’s barrier against moisture becomes weakened, making it prone to leaking. Large chips can also cause the tub to rust and even crack in half.