Get matched with top pressure washers in Plainview, NE

Yes, you can pressure wash epoxy garage floors. Most epoxy floors can be cleaned with a mop, but you may choose to pressure wash your floor if it is stained, has ground-in dirt, or is covered with mold or mildew. Before pressure washing, soak stains and dirty areas with a gentle cleanser for best results. Then use a pressure washer tip angled at 45 degrees and raise the spray nozzle to at least 18 inches off the floor to protect the flooring surface. You can also use a surface cleaner power washer or rotary scrubber to prevent overspray. 

You can certainly utilize a pressure washer to effectively clean your garage floor. If you're dealing with oily residue, consider adding a degreaser to the pressure washer solution. Prior to using the pressure washer, make sure to thoroughly sweep the garage floor to eliminate any loose dirt or debris.

Begin the pressure washing process from the back of your garage, which is closest to your home, and work your way towards the front. This ensures that the water and dirt are directed outside. In case you've applied a cleanser or degreaser, it's a good idea to give the floor another pass with clean water using the pressure washer to ensure a thorough rinse.

You can rinse your solar panels in some cases. For example, periodically rinsing your solar panels can remove light debris if you live in an agricultural or dusty area. Light dust and dirt won’t affect efficiency much, but they can build up and mix with other debris like animal droppings, leaves, and small sticks. 

Always wear protective gear, including a mask, gloves, and eye goggles, whenever you’re dealing with high-pressure cleaning or cleaning with chemicals. But even if you’re just using plain water with your jet washer, don some gear to avoid splashing—especially from the hot water of a power washer—or any particles of dirt or debris that might fly off the surface as you clean it.