Get matched with top fencing pros in Laurel, NE

You can DIY a stockade fence installation, but prepare to put in some good sweat equity. For the best results, carefully plan the exact location of your fence before you break ground. In particular, carefully map out your post locations before setting them in concrete. Be sure to call your local utility company before digging to avoid damaging underground wiring and causing severe injury.

On the other hand, installing stockade fencing on your own might sound too overwhelming. It’s certainly time-consuming and labor-intensive. Besides the hard work, you must install it properly to avoid gaps. Unless you’re confident you can get the job done right, hiring a privacy fence installer near you is the way to go.

Yes, fence posts should be set in concrete to provide the proper support for the fence. If you notice your fence posts leaning, you’ll need to learn how to brace a fence post to fix the problem and prevent further damage from occurring. By bracing a fence post properly, you’ll provide stability and sturdiness to your fence for years to come.

A silt fence should be buried in a trench that is 6 to 12 inches deep. A depth of at least 6 to 8 inches is necessary to prevent water and sediment from running underneath the fence. A deeper trench, up to 12 inches, provides better anchoring during wet and windy weather. To ensure proper installation, look for a red line on the silt fence fabric, which often indicates the correct burial depth. Always adhere to local guidelines and regulations; a professional contractor will be familiar with these requirements.

While most homeowners aren't required to tell their neighbors that they’re putting up a fence, it's certainly a good idea to do so. Not only is it considerate to give neighbors a heads up about construction noise, but building a fence may limit your neighbors' access to their own backyards while building is taking place.